Whether in the wc or in a pool, it occasionally happens that the Huawei Ascend Y300 is slipped in the water. Nonetheless, it’s not simply because a cellphone has fallen in the water that it’s undoubtedly dead. Certainly, it is feasible to redo an Huawei Ascend Y300 that has fallen in the water. To get this done, it is essential to respect specific steps. People generally have bad reflexes and this is what can deteriorate the Huawei Ascend Y300. We will 1st see the techniques to be taken after the Huawei Ascend Y300 has fallen into the water. We will see in the second place the classical errors that most people make.
Methods to follow in the event that your Huawei Ascend Y300 fell into the water
In the event that you need to restore your Huawei Ascend Y300 in operating order, we highly recommend that you follow the steps listed below.
Don’t attempt to turn the Huawei Ascend Y300 back on after exiting the water
The first thing to accomplish when the Huawei Ascend Y300 has fallen into the water is to turn off the cellphone. Certainly, in the event that it didn’t turn off, turn it off without doing any other manipulation. If it is already off, do not attempt to turn it back on for the moment. If the Huawei Ascend Y300 is switched on and wet, you can make a short circuit and therefore toast the cellphone.
Remove detachable components
When the Huawei Ascend Y300 is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it will be essential to take out the shell, the SIM card, the SD card and the battery if possible. When completed, put all of these items to dry and continue to the next step.
Aspire the water that is in your Huawei Ascend Y300
By using a straw, you must suck up the water that is contained in your Huawei Ascend Y300. For doing it, you just have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Huawei Ascend Y300, you will be ready to start drying it.
Dry the Huawei Ascend Y300
The fourth step is to dry the cellphone. For this, we suggest you to put it in front of a ventilator several hours. Prevent using techniques that cause the cellphone to heat up or damage the cellphone. When it is finished, we suggest you to leave the Huawei Ascend Y300 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Huawei Ascend Y300.
Reassemble the components and turn on the Huawei Ascend Y300
When you have completed the previous steps, your Huawei Ascend Y300 should be dry. So now you can make an attempt to turn on the Huawei Ascend Y300. If this doesn’t function, we suggest you to wait some days or to bring the Huawei Ascend Y300 to a repairman.
What should not be done in the event that the Huawei Ascend Y300 has fallen into the water
You will find several things not to accomplish when ever your Huawei Ascend Y300 has fallen into the water. The 1st is to make an attempt to turn the cellphone back on just after. This can demolish the Huawei Ascend Y300. Next, it is strongly advised not to use a heat source to dry the Huawei Ascend Y300. In fact, solutions such as oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the cellphone, do not shake it. In fact, it could also damage the Huawei Ascend Y300.
