Whether in the toilet or in a pool, it occasionally occurs that the HTC Desire 610 is dropped in the water. Even so, it’s not because a mobile phone has fallen in the water that it’s obviously dead. In truth, it is possible to redo an HTC Desire 610 that has fallen in the water. To accomplish this, it is important to respect certain actions. People often have bad reflexes and this is what can deteriorate the HTC Desire 610. We will 1st see the steps to be taken after the HTC Desire 610 has fallen into the water. We will see in the second place the classical errors that most people make.
Steps to follow if your HTC Desire 610 fell into the water
If you wish to recover your HTC Desire 610 in working order, we recommend that you follow the steps below.
Don’t try to turn the HTC Desire 610 back on after getting out the water
The very first thing to do when the HTC Desire 610 has fallen into the water is to switch off the mobile phone. In truth, if it didn’t switch off, turn it off without doing any other tricks. In the event that it is already off, do not try to turn it back on for the moment. In the event that the HTC Desire 610 is switched on and wet, you might create a short circuit and therefore toast the mobile phone.
Remove detachable components
Once the HTC Desire 610 is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it’ll be important to take away the shell, the SIM card, the SD card and the electric battery if possible. Once completed, put all of these items to dry and continue to the following step.
Aspire the water that is in your HTC Desire 610
Utilizing a straw, you will need to suck up the water that is contained in your HTC Desire 610. For this, you only have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your HTC Desire 610, you will be ready to start drying it.
Dry the HTC Desire 610
The fourth step is to dry the mobile phone. For this, we advise you to put it in front of a ventilator several hours. Prevent using techniques that cause the mobile phone to heat up or damage the mobile phone. Once it is finished, we advise you to leave the HTC Desire 610 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the HTC Desire 610.
Reassemble the components and turn on the HTC Desire 610
When you have completed the prior steps, your HTC Desire 610 should be dry. So now you can make an attempt to turn on the HTC Desire 610. If perhaps this doesn’t do the job, we advise you to wait a few days or to bring the HTC Desire 610 to a repairman.
What should not be done if the HTC Desire 610 has fallen into the water
You will find several things not to do when ever your HTC Desire 610 has fallen into the water. The 1st is to make an attempt to turn the mobile phone back on just after. This can kill the HTC Desire 610. Following, it is strongly suggested not to use a heat source to dry the HTC Desire 610. Without a doubt, techniques such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile phone, do not shake it. Certainly, it could additionally damage the HTC Desire 610.
