Whether in the wc or in a pool, it from time to time occurs that the HTC Desire 300 is slipped in the water. However, it is not simply because a phone has fallen in the water that it’s undoubtedly dead. In truth, it is feasible to redo an HTC Desire 300 that has fallen in the water. To get this done, it is essential to respect specific actions. People often have bad reflexes and this is what can degrade the HTC Desire 300. We will first of all see the techniques to be taken after the HTC Desire 300 has fallen into the water. We will see in the secondary place the classical errors that a large number of people make.
Methods to follow if perhaps your HTC Desire 300 fell into the water
If you want to recover your HTC Desire 300 in working order, we advise that you follow the steps listed below.
Do not attempt to turn the HTC Desire 300 back on after getting out the water
One thing to accomplish when the HTC Desire 300 has fallen into the water is to turn off the phone. In truth, if perhaps it did not switch off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the HTC Desire 300 is turned on and wet, you might produce a short circuit and consequently toast the phone.
Remove detachable components
Once the HTC Desire 300 is out of the water and turned off, it will have to be disassembled to the maximum. This implies that it will be essential to take out the shell, the SIM card, the SD card and the electric battery if possible. Once finished, put all of these items to dry and continue to the next step.
Aspire the water that is in your HTC Desire 300
By using a straw, you need to suck up the water that is contained in your HTC Desire 300. For this, you merely have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your HTC Desire 300, you will be ready to start drying it.
Dry the HTC Desire 300
The fourth step is to dry the phone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the phone to heat up or damage the phone. Once it is done, we advise you to leave the HTC Desire 300 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the HTC Desire 300.
Reassemble the components and turn on the HTC Desire 300
When you have completed the previous steps, your HTC Desire 300 should be dry. So now you can try to turn on the HTC Desire 300. If perhaps this doesn’t function, we advise you to hang on a couple of days or to bring the HTC Desire 300 to a repairman.
What should not be done if perhaps the HTC Desire 300 has fallen into the water
There are a number of stuff not to accomplish when your HTC Desire 300 has fallen into the water. The first of all is to try to turn the phone back on just after. This can kill the HTC Desire 300. Following, it is strongly advised not to use a heat source to dry the HTC Desire 300. Without a doubt, methods such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the phone, do not shake it. Indeed, it could likewise ruin the HTC Desire 300.
