Whether in the toilet or in a swimming pool, it occasionally occurs that the HTC 10 is slipped into the water. On the other hand, it isn’t simply because a cellphone has fallen into the water that it is inevitably dead. In truth, it is feasible to redo an HTC 10 that has fallen into the water. To get this done, it is important to respect certain actions. People frequently have bad reflexes and this is what can deteriorate the HTC 10. We will 1st see the techniques to be taken after the HTC 10 has fallen into the water. We will see in the secondary place the classical mistakes that most people make.
Steps to follow if your HTC 10 fell into the water
In the event that you need to restore your HTC 10 in operating order, we recommend that you follow the steps listed below.
Don’t try to turn the HTC 10 back on after exiting the water
The very first thing to perform when the HTC 10 has fallen into the water is to turn off the cellphone. In truth, if it didn’t switch off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the HTC 10 is started and wet, you can generate a short circuit and as a result toast the cellphone.
Remove detachable components
When the HTC 10 is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it will be important to take out the shell, the SIM card, the SD card and the battery if possible. When done, put all of these things to dry and continue to the next step.
Aspire the water that is in your HTC 10
Utilizing a straw, you will have to suck up the water that is contained in your HTC 10. For doing it, you simply have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your HTC 10, you will have the capacity to start drying it.
Dry the HTC 10
The fourth step is to dry the cellphone. For this, we advise you to put it in front of a ventilator several hours. Avoid using méthodes that cause the cellphone to heat up or damage the cellphone. When it is finished, we advise you to leave the HTC 10 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the HTC 10.
Reassemble the components and turn on the HTC 10
When you have completed the previous steps, your HTC 10 should be dry. So now you can try to turn on the HTC 10. In the event that this doesn’t perform, we advise you to hold out some days or to bring the HTC 10 to a repairshop.
What should not be done if the HTC 10 has fallen into the water
There are several stuff not to perform when ever your HTC 10 has fallen into the water. The 1st is to try to turn the cellphone back on just after. This can demolish the HTC 10. Next, it is strongly suggested not to use a heat source to dry the HTC 10. Indeed, solutions such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the cellphone, do not shake it. Certainly, it could as well damage the HTC 10.
