Whether in the toilet or in a swimming pool, it occasionally occurs that the Doro PhoneEasy 740 is dropped into the water. Nevertheless, it isn’t simply because a phone has fallen into the water that it’s undoubtedly dead. Indeed, it is possible to redo an Doro PhoneEasy 740 that has fallen into the water. To get this done, it is important to respect particular actions. People often have bad reflexes and this is what can degrade the Doro PhoneEasy 740. We will first of all see the methods to be taken after the Doro PhoneEasy 740 has fallen into the water. We will see in the 2nd place the common errors that the majority of people make.
Methods to follow if perhaps your Doro PhoneEasy 740 fell into the water
If perhaps you wish to restore your Doro PhoneEasy 740 in working order, we highly recommend that you follow the steps listed below.
Don’t try to turn the Doro PhoneEasy 740 back on after exiting the water
One thing to do when the Doro PhoneEasy 740 has fallen into the water is to switch off the phone. Indeed, if perhaps it didn’t turn off, turn it off without doing any other manipulation. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Doro PhoneEasy 740 is turned on and wet, you can produce a short circuit and consequently toast the phone.
Remove detachable components
Once the Doro PhoneEasy 740 is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it will probably be important to take out the shell, the SIM card, the SD card and the electric battery if possible. Once carried out, put all of these items to dry and continue to the next step.
Aspire the water that is in your Doro PhoneEasy 740
Using a straw, you must suck up the water that is contained in your Doro PhoneEasy 740. For doing it, you just need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Doro PhoneEasy 740, you will have the capacity to start drying it.
Dry the Doro PhoneEasy 740
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the phone to heat up or damage the phone. Once it is finished, we recommend you to leave the Doro PhoneEasy 740 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Doro PhoneEasy 740.
Reassemble the components and turn on the Doro PhoneEasy 740
When you have completed the previous steps, your Doro PhoneEasy 740 should be dry. So now you can make an attempt to turn on the Doro PhoneEasy 740. If perhaps this does not do the job, we recommend you to hold out a couple of days or to bring the Doro PhoneEasy 740 to a repairman.
What should not be done if perhaps the Doro PhoneEasy 740 has fallen into the water
There are a number of points not to do when ever your Doro PhoneEasy 740 has fallen into the water. The first of all is to make an attempt to turn the phone back on just after. This can kill the Doro PhoneEasy 740. Following, it is highly advised not to use a heat source to dry the Doro PhoneEasy 740. In fact, techniques such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the phone, do not shake it. In fact, it could additionally damage the Doro PhoneEasy 740.
