Whether in the toilet or in a pool, it occasionally occurs that the Blackviews R7 is dropped into the water. Even so, it isn’t simply because a mobile phone has fallen into the water that it is undoubtedly dead. In truth, it is feasible to redo an Blackviews R7 that has fallen into the water. To achieve this, it is necessary to respect particular actions. People generally have bad reflexes and this is what can degrade the Blackviews R7. We will first of all see the techniques to be taken after the Blackviews R7 has fallen into the water. We will see in the second place the common mistakes that a large number of people make.
Methods to follow if perhaps your Blackviews R7 fell into the water
If perhaps you wish to restore your Blackviews R7 in working order, we suggest that you follow the steps below.
Don’t try to turn the Blackviews R7 back on after exiting the water
The first thing to accomplish when the Blackviews R7 has fallen into the water is to shut off the mobile phone. In truth, if perhaps it didn’t switch off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Blackviews R7 is switched on and wet, you could generate a short circuit and consequently toast the mobile phone.
Remove detachable components
Once the Blackviews R7 is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it will be necessary to remove the shell, the SIM card, the SD card and the battery if possible. Once carried out, put all of these things to dry and proceed to the next step.
Aspire the water that is in your Blackviews R7
By using a straw, you need to suck up the water that is contained in your Blackviews R7. For this, you simply have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Blackviews R7, you will have the capacity to start drying it.
Dry the Blackviews R7
The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using solutions that cause the mobile phone to heat up or damage the mobile phone. Once it is completed, we recommend you to leave the Blackviews R7 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Blackviews R7.
Reassemble the components and turn on the Blackviews R7
When you have completed the previous steps, your Blackviews R7 should be dry. So now you can make an attempt to turn on the Blackviews R7. If this doesn’t perform, we recommend you to hold out a couple of days or to bring the Blackviews R7 to a repairshop.
What should not be done if perhaps the Blackviews R7 has fallen into the water
There are a number of stuff not to accomplish when your Blackviews R7 has fallen into the water. The first of all is to make an attempt to turn the mobile phone back on just after. This can destroy the Blackviews R7. Next, it is highly suggested not to use a heat source to dry the Blackviews R7. In fact, techniques which include oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the mobile phone, do not shake it. In fact, it could also damage the Blackviews R7.
