Whether in the toilet or in a pool, it from time to time happens that the Blackviews E7 is slipped into the water. Nonetheless, it is not simply because a mobile phone has fallen into the water that it is obviously dead. In truth, it is possible to redo an Blackviews E7 that has fallen into the water. To do this, it is important to respect particular actions. People often have bad reflexes and this is what can degrade the Blackviews E7. We will first of all see the steps to be taken after the Blackviews E7 has fallen into the water. We will see in the second place the classical mistakes that many people make.
Methods to follow in cases where your Blackviews E7 fell into the water
If you desire to recover your Blackviews E7 in operating order, we highly recommend that you follow the steps listed below.
Do not try to turn the Blackviews E7 back on after getting out the water
One thing to perform when the Blackviews E7 has fallen into the water is to switch off the mobile phone. In truth, in cases where it did not switch off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Blackviews E7 is switched on and wet, you might create a short circuit and therefore toast the mobile phone.
Remove detachable components
Once the Blackviews E7 is out of the water and switched off, it will have to be disassembled to the maximum. This means that it will probably be important to take away the shell, the SIM card, the SD card and the electric battery if possible. Once completed, put all of these items to dry and continue to the following step.
Aspire the water that is in your Blackviews E7
Employing a straw, you will need to suck up the water that is contained in your Blackviews E7. For doing it, you merely have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Blackviews E7, you will be able to start drying it.
Dry the Blackviews E7
The fourth step is to dry the mobile phone. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using techniques that cause the mobile phone to heat up or damage the mobile phone. Once it is completed, we suggest you to leave the Blackviews E7 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Blackviews E7.
Reassemble the components and turn on the Blackviews E7
When you have completed the prior steps, your Blackviews E7 should be dry. So now you can make an attempt to turn on the Blackviews E7. In the event that this doesn’t function, we suggest you to hang on a couple of days or to bring the Blackviews E7 to a repairshop.
What should not be done in cases where the Blackviews E7 has fallen into the water
There are a number of points not to perform when your Blackviews E7 has fallen into the water. The first of all is to make an attempt to turn the mobile phone back on just after. This can kill the Blackviews E7. Following, it is highly recommended not to use a heat source to dry the Blackviews E7. Certainly, methods such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile phone, do not shake it. Certainly, it could also ruin the Blackviews E7.
