Whether in the wc or in a swimming pool, it occasionally occurs that the Blackview BV5800 is slipped into the water. Nevertheless, it’s not simply because a phone has fallen into the water that it is unavoidably dead. Indeed, it is feasible to redo an Blackview BV5800 that has fallen into the water. To achieve this, it is needed to respect certain actions. People typically have bad reflexes and this is what can damage the Blackview BV5800. We will 1st discover the techniques to be taken after the Blackview BV5800 has fallen into the water. We will discover in the second place the common errors that most people make.
Steps to follow in the event that your Blackview BV5800 fell into the water
Whenever you desire to restore your Blackview BV5800 in working order, we advise that you follow the steps listed below.
Don’t attempt to turn the Blackview BV5800 back on after getting out the water
The very first thing to accomplish when the Blackview BV5800 has fallen into the water is to switch off the phone. Indeed, in the event that it did not switch off, turn it off without doing any other tricks. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Blackview BV5800 is started and wet, you might generate a short circuit and consequently toast the phone.
Remove detachable components
Once the Blackview BV5800 is out of the water and turned off, it will have to be disassembled to the maximum. This implies that it will be needed to take away the shell, the SIM card, the SD card and the battery if possible. Once carried out, put all of these items to dry and continue to the next step.
Aspire the water that is in your Blackview BV5800
By using a straw, you will need to suck up the water that is contained in your Blackview BV5800. For this, you merely have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Blackview BV5800, you will have the capacity to start drying it.
Dry the Blackview BV5800
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using solutions that cause the phone to heat up or damage the phone. Once it is performed, we recommend you to leave the Blackview BV5800 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Blackview BV5800.
Reassemble the components and turn on the Blackview BV5800
When you have completed the previous steps, your Blackview BV5800 should be dry. So now you can try to turn on the Blackview BV5800. If perhaps this does not function, we recommend you to hang on a few days or to bring the Blackview BV5800 to a repairman.
What should not be done in the event that the Blackview BV5800 has fallen into the water
You will find several stuff not to accomplish when ever your Blackview BV5800 has fallen into the water. The 1st is to try to turn the phone back on just after. This can kill the Blackview BV5800. Next, it is strongly advised not to use a heat source to dry the Blackview BV5800. Indeed, methods which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. Indeed, it could as well damage the Blackview BV5800.
