Whether in the toilet or in a pool, it occasionally occurs that the Archos 40 is slipped into the water. On the other hand, it isn’t simply because a mobile phone has fallen into the water that it is unavoidably dead. In truth, it is possible to redo an Archos 40 that has fallen into the water. To do this, it is needed to respect certain steps. People typically have bad reflexes and this is what can deteriorate the Archos 40. We will first see the steps to be taken after the Archos 40 has fallen into the water. We will see in the 2nd place the classical mistakes that a large number of people make.
Steps to follow if your Archos 40 fell into the water
If you desire to restore your Archos 40 in operating order, we advise that you follow the steps listed below.
Don’t try to turn the Archos 40 back on after exiting the water
One thing to do when the Archos 40 has fallen into the water is to turn off the mobile phone. In truth, if it did not switch off, turn it off without doing any other manipulation. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Archos 40 is started and wet, you might make a short circuit and therefore toast the mobile phone.
Remove detachable components
Once the Archos 40 is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it will be needed to take out the shell, the SIM card, the SD card and the battery if possible. Once done, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Archos 40
Using a straw, you need to suck up the water that is contained in your Archos 40. For doing it, you just need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Archos 40, you will have the capacity to start drying it.
Dry the Archos 40
The fourth step is to dry the mobile phone. For this, we advise you to put it in front of a ventilator several hours. Avoid using méthodes that cause the mobile phone to heat up or damage the mobile phone. Once it is finished, we advise you to leave the Archos 40 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Archos 40.
Reassemble the components and turn on the Archos 40
When you have completed the previous steps, your Archos 40 should be dry. So now you can make an attempt to turn on the Archos 40. In the event that this doesn’t function, we advise you to hang on some days or to bring the Archos 40 to a repairman.
What should not be done if the Archos 40 has fallen into the water
You will find several points not to do when ever your Archos 40 has fallen into the water. The first is to make an attempt to turn the mobile phone back on just after. This can kill the Archos 40. Next, it is strongly recommended not to use a heat source to dry the Archos 40. Without a doubt, techniques such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile phone, do not shake it. In fact, it could likewise ruin the Archos 40.
