Whether in the toilet or in a pool, it sometimes happens that the Alcatel 6032X is slipped into the water. Nevertheless, it is not simply because a telephone has fallen into the water that it’s undoubtedly dead. Certainly, it is possible to redo an Alcatel 6032X that has fallen into the water. To accomplish this, it is required to respect specific steps. People often have bad reflexes and this is what can damage the Alcatel 6032X. We will first of all see the steps to be taken after the Alcatel 6032X has fallen into the water. We will see in the 2nd place the common mistakes that a large number of people make.
Steps to follow if your Alcatel 6032X fell into the water
If perhaps you desire to recover your Alcatel 6032X in working order, we recommend that you follow the steps listed below.
Don’t attempt to turn the Alcatel 6032X back on after exiting the water
One thing to perform when the Alcatel 6032X has fallen into the water is to turn off the telephone. Certainly, if it did not switch off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Alcatel 6032X is started and wet, you might generate a short circuit and therefore toast the telephone.
Remove detachable components
Once the Alcatel 6032X is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it will be required to remove the shell, the SIM card, the SD card and the electric battery if possible. Once done, put all of these items to dry and continue to the next step.
Aspire the water that is in your Alcatel 6032X
Using a straw, you will have to suck up the water that is contained in your Alcatel 6032X. For doing it, you just need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Alcatel 6032X, you will be ready to start drying it.
Dry the Alcatel 6032X
The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator several hours. Prevent using solutions that cause the telephone to heat up or damage the telephone. Once it is done, we advise you to leave the Alcatel 6032X in rice for 24 or 48 hours. The rice will therefore absorb the wetness that remains in the Alcatel 6032X.
Reassemble the components and turn on the Alcatel 6032X
When you have completed the prior steps, your Alcatel 6032X should be dry. So now you can try to turn on the Alcatel 6032X. In the event that this doesn’t function, we advise you to wait a few days or to bring the Alcatel 6032X to a repairshop.
What should not be done if the Alcatel 6032X has fallen into the water
There are several points not to perform when your Alcatel 6032X has fallen into the water. The first of all is to try to turn the telephone back on just after. This can kill the Alcatel 6032X. Following, it is strongly suggested not to use a heat source to dry the Alcatel 6032X. In fact, methods such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the telephone, do not shake it. In fact, it could as well damage the Alcatel 6032X.
