Whether in the toilet or in a swimming pool, it sometimes occurs that the Acer Liquid Zest is dropped in the water. Nonetheless, it’s not because a telephone has fallen in the water that it’s obviously dead. Certainly, it is feasible to redo an Acer Liquid Zest that has fallen in the water. To accomplish this, it is required to respect particular actions. People frequently have bad reflexes and this is what can degrade the Acer Liquid Zest. We will first see the methods to be taken after the Acer Liquid Zest has fallen into the water. We will see in the secondary place the common errors that a good number of people make.
Steps to follow if your Acer Liquid Zest fell into the water
If you want to restore your Acer Liquid Zest in working order, we recommend that you follow the steps below.
Don’t try to turn the Acer Liquid Zest back on after getting out the water
The very first thing to accomplish when the Acer Liquid Zest has fallen into the water is to turn off the telephone. Certainly, if it did not switch off, turn it off without doing any other manipulation. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Acer Liquid Zest is turned on and wet, you can create a short circuit and as a result toast the telephone.
Remove detachable components
When the Acer Liquid Zest is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it will probably be required to take away the shell, the SIM card, the SD card and the battery if possible. When done, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Acer Liquid Zest
Employing a straw, you must suck up the water that is contained in your Acer Liquid Zest. For doing it, you merely have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Acer Liquid Zest, you will be able to start drying it.
Dry the Acer Liquid Zest
The fourth step is to dry the telephone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using techniques that cause the telephone to heat up or damage the telephone. When it is performed, we suggest you to leave the Acer Liquid Zest in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the Acer Liquid Zest.
Reassemble the components and turn on the Acer Liquid Zest
When you have completed the prior steps, your Acer Liquid Zest should be dry. So now you can make an attempt to turn on the Acer Liquid Zest. If this doesn’t perform, we suggest you to hold out a couple of days or to bring the Acer Liquid Zest to a repairman.
What should not be done if the Acer Liquid Zest has fallen into the water
You will find several things not to accomplish when your Acer Liquid Zest has fallen into the water. The first is to make an attempt to turn the telephone back on just after. This can destroy the Acer Liquid Zest. Next, it is highly suggested not to use a heat source to dry the Acer Liquid Zest. Without a doubt, methods such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the telephone, do not shake it. In fact, it could as well ruin the Acer Liquid Zest.
