Whether in the toilet or in a swimming pool, it from time to time happens that the Acer Liquid Jade S is dropped into the water. Nonetheless, it is not simply because a phone has fallen into the water that it is unavoidably dead. Indeed, it is feasible to redo an Acer Liquid Jade S that has fallen into the water. To accomplish this, it is essential to respect particular actions. People often have bad reflexes and this is what can degrade the Acer Liquid Jade S. We will 1st discover the steps to be taken after the Acer Liquid Jade S has fallen into the water. We will discover in the secondary place the classical mistakes that a good number of people make.
Steps to follow in cases where your Acer Liquid Jade S fell into the water
Whenever you wish to recover your Acer Liquid Jade S in operating order, we highly recommend that you follow the steps listed below.
Do not try to turn the Acer Liquid Jade S back on after getting out the water
One thing to accomplish when the Acer Liquid Jade S has fallen into the water is to switch off the phone. Indeed, in cases where it did not turn off, turn it off without doing any other tricks. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Acer Liquid Jade S is turned on and wet, you might make a short circuit and consequently toast the phone.
Remove detachable components
When the Acer Liquid Jade S is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it’ll be essential to remove the shell, the SIM card, the SD card and the electric battery if possible. When finished, put all of these things to dry and continue to the following step.
Aspire the water that is in your Acer Liquid Jade S
Using a straw, you will need to suck up the water that is contained in your Acer Liquid Jade S. For doing it, you simply have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Acer Liquid Jade S, you will have the ability to start drying it.
Dry the Acer Liquid Jade S
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Prevent using procédures that cause the phone to heat up or damage the phone. When it is performed, we suggest you to leave the Acer Liquid Jade S in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Acer Liquid Jade S.
Reassemble the components and turn on the Acer Liquid Jade S
When you have completed the prior steps, your Acer Liquid Jade S should be dry. So now you can try to turn on the Acer Liquid Jade S. If perhaps this does not work, we suggest you to wait some days or to bring the Acer Liquid Jade S to a repairshop.
What should not be done in cases where the Acer Liquid Jade S has fallen into the water
You will find several points not to accomplish when ever your Acer Liquid Jade S has fallen into the water. The 1st is to try to turn the phone back on just after. This can kill the Acer Liquid Jade S. Next, it is strongly advised not to use a heat source to dry the Acer Liquid Jade S. Indeed, solutions such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the phone, do not shake it. Certainly, it could additionally damage the Acer Liquid Jade S.
