Oftentimes, the CUBOT ECHO displays the Authentication Problem message when you try to connect to a Wi-Fi network. This sort of error message can potentially originate from a lot of places. So, so that you can connect properly to the Wifi network with your CUBOT ECHO, we decided to write this guide. So we will find out together what to do and where to look to solve this issue of Wifi authentication. We will see at 1st what you need to do on the CUBOT ECHO. Finally, we will see what it is important to do and check on your Wifi box.
How to proceed when the CUBOT ECHO has an authentication problem on the Wifi network
Forget the Wifi network on your CUBOT ECHO
If perhaps the Wi-Fi network to which you desire to connect has been changed since your last authentication, your CUBOT ECHO may display the text message: Authentication or authentication error . If perhaps the trouble comes from there, the answer is straightforward. Just forget about the Wifi network in your CUBOT ECHO. To accomplish this, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to choose the option: Forget this network . Once it is completed, you can try again to connect to the Wifi network. If the trouble is not solved, go to the next section.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it might happen to have a trouble of authentication Wifi on the CUBOT ECHO because the box is not in Synchronization mode . If you want to activate the synchronization mode of your box, it is extremely basic. You should find a synchronization button to press. When this is completed, a light will normally start blinking. You can actually then try to reconnect to the Wifi network with your CUBOT ECHO. If perhaps it still will not work, go to the next trick.
Retype Password
Oftentimes the authentication problem comes from the technique you type the Wifi network security password. Indeed, it is sometimes subtle to type a security password Wifi on its CUBOT ECHO. We consequently advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the security password in uppercase
- Type the security password in lowercase
Restart your box
As in several pc problems, the solution is at times extremely simple. Indeed, 80% of the pc problems are solved by restarting the machine. We therefore advise you to restart your box and your CUBOT ECHO. After that try to reconnect with your CUBOT ECHO.
Check box settings
If perhaps none of the prior solutions did work, the problem could be found to be on the box of your provider. It will consequently be important to go in the parameters of the box and to test if the system of key is in WPA / WPA2 . If perhaps this is not the case, choose this option. After that try to connect your CUBOT ECHO again to Wifi. If perhaps the authentication trouble continues, we recommend that you contact your service provider or a telephone store.
