At times, the CUBOT Cheetah 2 displays the Authentication Problem message when you try to connect to a Wi-Fi network. This kind of error message can potentially originate from several places. So, so that you may connect properly to the Wifi network with your CUBOT Cheetah 2, we decided to write this tuto. So we will find out together what to do and where to look to resolve this problem of Wifi authentication. We will see at first what you must do on the CUBOT Cheetah 2. Finally, we will see what it’s necessary to do and check on your Wifi box.
How to proceed when the CUBOT Cheetah 2 has an authentication problem on the Wifi network
Forget the Wifi network on your CUBOT Cheetah 2
If perhaps the Wi-Fi network to which you want to connect has been changed since your last authentication, your CUBOT Cheetah 2 may display the message: Authentication or authentication error . If perhaps the trouble comes from there, the answer is fairly simple. Just forget about the Wifi network in your CUBOT Cheetah 2. To accomplish this, go to the settings of the Wifi network and keep pressed on the network in question. You will after that have the option to choose the option: Forget this network . Once it is carried out, you may try again to connect to the Wifi network. In the event that the trouble is not solved, go to the next section.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it might happen to have a trouble of authentication Wifi on the CUBOT Cheetah 2 because the box is not in Synchronization mode . If you want to activate the synchronization mode of your box, it’s extremely simple. You should find a synchronization button to press. When ever this is carried out, a light will most of the time start blinking. You can after that try to reconnect to the Wifi network with your CUBOT Cheetah 2. If perhaps it still doesn’t function, go to the next trick.
Retype Security password
At times the authentication problem originates from the solution you type the Wifi network security password. In fact, it’s sometimes subtle to type a security password Wifi on its CUBOT Cheetah 2. We therefore advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the security password in uppercase
- Type the security password in lowercase
Restart your box
As in many laptop problems, the solution is at times extremely simple. In fact, 80% of the laptop problems are solved by restarting the machine. We therefore recommend you to restart your box and your CUBOT Cheetah 2. Then try to reconnect with your CUBOT Cheetah 2.
Check box settings
If perhaps none of the prior solutions did function, the problem may perhaps be found to be on the box of your provider. It will therefore be necessary to go in the parameters of the box and to check in cases where the system of key is in WPA / WPA2 . If perhaps this is not the circumstance, choose this option. Then try to connect your CUBOT Cheetah 2 again to Wifi. If perhaps the authentication trouble continues, we advise that you contact your service provider or a telephone store.
