Occasionally, the Crosscall TREKKER-S1 displays the Authentication Problem message when you try to connect to a Wi-Fi network. This sort of error message can potentially sourced from a lot of places. So, so that youre able to connect properly to the Wifi network with your Crosscall TREKKER-S1, we decided to write this tuto. So we will find out together what to do and where to look to resolve this issue of Wifi authentication. We will see at first of all what you need to do on the Crosscall TREKKER-S1. Finally, we will see what it can be necessary to do and check on your Wifi box.
How to proceed when the Crosscall TREKKER-S1 has an authentication problem on the Wifi network
Forget the Wifi network on your Crosscall TREKKER-S1
If perhaps the Wi-Fi network to which you want to connect has been changed since your last authentication, your Crosscall TREKKER-S1 may display the text: Authentication or authentication error . If perhaps the issue comes from there, the solution is fairly simple. Simply forget about the Wifi network in your Crosscall TREKKER-S1. To accomplish this, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to choose the option: Forget this network . Once it’s done, youre able to try again to connect to the Wifi network. In the event that the issue is not fixed, go to the next section.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may happen to have a issue of authentication Wifi on the Crosscall TREKKER-S1 because the box is not in Synchronization mode . If you want to activate the synchronization mode of your box, it can be very basic. You should find a synchronization button to press. When this is done, a light will normally start blinking. You can then try to reconnect to the Wifi network with your Crosscall TREKKER-S1. If perhaps it still doesn’t function, go to the next trick.
Retype Security password
Occasionally the authentication problem comes from the solution you type the Wifi network security password. Certainly, it can be sometimes subtle to type a security password Wifi on its Crosscall TREKKER-S1. We consequently advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the security password in uppercase
- Type the security password in lowercase
Restart your box
As in several laptop problems, the solution is from time to time very simple. Certainly, 80% of the laptop problems are solved by restarting the machine. We therefore advise you to restart your box and your Crosscall TREKKER-S1. Then try to reconnect with your Crosscall TREKKER-S1.
Check box settings
If perhaps none of the prior solutions did function, the problem could be found to be on the box of your provider. It will consequently be necessary to go in the parameters of the box and to check in cases where the system of key is in WPA / WPA2 . If perhaps this is not the circumstance, choose this option. Then try to connect your Crosscall TREKKER-S1 again to Wifi. If perhaps the authentication issue continues, we advise that you contact your service provider or a telephone retail store.
