Oftentimes, the ZTE Blade V8 displays the Authentication Problem message when ever you try to connect to a Wi-Fi network. This kind of error message can potentially be caused by a lot of places. So, so that you can connect properly to the Wifi network with your ZTE Blade V8, we decided to write this tuto. So we will observe together what to do and where to look to resolve this issue of Wifi authentication. We will see at initially what you have to do on the ZTE Blade V8. At last, we will see what it can be required to do and check on your Wifi box.
How to proceed when the ZTE Blade V8 has an authentication problem on the Wifi network
Forget the Wifi network on your ZTE Blade V8
In the event that the Wi-Fi network to which you desire to connect has been changed since your last authentication, your ZTE Blade V8 may display the text message: Authentication or authentication error . In the event that the problem comes from there, the solution is quite easy. Just forget about the Wifi network in your ZTE Blade V8. To accomplish this, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to select the option: Forget this network . Once it’s carried out, you can try again to connect to the Wifi network. If perhaps the problem is not resolved, go to the next step.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may possibly happen to have a problem of authentication Wifi on the ZTE Blade V8 because the box is not in Synchronization mode . If you need to activate the synchronization mode of your box, it can be incredibly basic. You should find a synchronization button to press. When ever this is carried out, a light will normally start blinking. You may then try to reconnect to the Wifi network with your ZTE Blade V8. In the event that it still does not work, go to the next trick.
Retype Security password
Oftentimes the authentication problem originates from the technique you type the Wifi network password. Certainly, it can be sometimes subtle to type a password Wifi on its ZTE Blade V8. We for that reason advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the password in uppercase
- Type the password in lowercase
Restart your box
As in a great many laptop problems, the solution is oftentimes incredibly simple. Certainly, 80% of the laptop problems are solved by restarting the machine. We therefore recommend you to restart your box and your ZTE Blade V8. After that try to reconnect with your ZTE Blade V8.
Check box settings
In the event that non-e of the prior answers did work, the problem could be found to be on the box of your provider. It will for that reason be required to go in the parameters of the box and to test whenever the system of key is in WPA / WPA2 . In the event that this is not the case, select this option. After that try to connect your ZTE Blade V8 again to Wifi. In the event that the authentication problem remains, we highly recommend that you contact your service provider or a telephone store.
