Sometimes, the Wiko VIEW 3 displays the Authentication Problem message when ever you try to connect to a Wi-Fi network. This sort of error message can potentially be caused by several places. So, so that you may connect properly to the Wifi network with your Wiko VIEW 3, we decided to produce this tuto. So we will discover together what to do and where to look to resolve this issue of Wifi authentication. We will see at initially what you have to do on the Wiko VIEW 3. Finally, we will see what it is important to do and check on your Wifi box.
What to do when the Wiko VIEW 3 has an authentication problem on the Wifi network
Forget the Wifi network on your Wiko VIEW 3
If the Wi-Fi network to which you desire to connect has been changed since your last authentication, your Wiko VIEW 3 may display the message: Authentication or authentication error . If the trouble comes from there, the solution is very simple. Just forget about the Wifi network in your Wiko VIEW 3. To get this done, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to choose the option: Forget this network . Once it is done, you may try again to connect to the Wifi network. In the event that the trouble is not solved, go to the next section.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may possibly happen to have a trouble of authentication Wifi on the Wiko VIEW 3 because the box is not in Synchronization mode . If you need to activate the synchronization mode of your box, it is very simple. You should find a synchronization button to press. When this is done, a light will normally start blinking. You’re able to then try to reconnect to the Wifi network with your Wiko VIEW 3. If it still will not function, go to the next trick.
Retype Password
Sometimes the authentication problem comes from the solution you type the Wifi network security password. In fact, it is sometimes subtle to type a security password Wifi on its Wiko VIEW 3. We for that reason advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the security password in uppercase
- Type the security password in lowercase
Restart your box
As in several pc problems, the solution is at times very simple. In fact, 80% of the pc problems are solved by restarting the machine. We therefore advise you to restart your box and your Wiko VIEW 3. Then try to reconnect with your Wiko VIEW 3.
Check box settings
If none of the prior solutions did function, the problem could be found to be on the box of your provider. It will for that reason be important to go in the parameters of the box and to check if perhaps the system of key is in WPA / WPA2 . If this is not the circumstance, choose this option. Then try to connect your Wiko VIEW 3 again to Wifi. If the authentication trouble carries on, we advise that you contact your service provider or a telephone store.
