Wiko VIEW 3 pro: Wifi Authentication Problem

At times, the Wiko VIEW 3 pro displays the Authentication Problem message when ever you try to connect to a Wi-Fi network. This kind of error message can potentially result from several places. So, so that you’re able to connect properly to the Wifi network with your Wiko VIEW 3 pro, we decided to write this tuto. So we will observe together what to do and where to look to solve this problem of Wifi authentication. We will see at first what you must do on the Wiko VIEW 3 pro. Finally, we will see what it is required to do and check on your Wifi box.

How to proceed when the Wiko VIEW 3 pro has an authentication problem on the Wifi network

Forget the Wifi network on your Wiko VIEW 3 pro

Whenever the Wi-Fi network to which you want to connect has been changed since your last authentication, your Wiko VIEW 3 pro may display the message: Authentication or authentication error . Whenever the trouble comes from there, the answer is very simple. Just forget about the Wifi network in your Wiko VIEW 3 pro. To do this, go to the settings of the Wifi network and keep pressed on the network in question. You will after that have the option to select the option: Forget this network . Once it’s done, you’re able to try again to connect to the Wifi network. If perhaps the trouble is not resolved, go to the next step.

Press the box button

Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it might happen to have a trouble of authentication Wifi on the Wiko VIEW 3 pro because the box is not in Synchronization mode . If you would like to activate the synchronization mode of your box, it is incredibly basic. You should find a synchronization button to press. When ever this is done, a light will normally start blinking. You’re able to after that try to reconnect to the Wifi network with your Wiko VIEW 3 pro. Whenever it still will not work, go to the next trick.

Retype Security password

At times the authentication problem comes from the solution you type the Wifi network password. In truth, it is sometimes subtle to type a password Wifi on its Wiko VIEW 3 pro. We therefore advise you to try all the following possibilities:

  • Type the code without spaces or hyphens
  • Type the password in uppercase
  • Type the password in lowercase

Restart your box

As in a great many computer problems, the solution is sometimes incredibly simple. In truth, 80% of the computer problems are solved by restarting the machine. We therefore recommend you to restart your box and your Wiko VIEW 3 pro. Then try to reconnect with your Wiko VIEW 3 pro.

Check box settings

Whenever none of the previous answers did work, the problem could be found to be on the box of your provider. It will therefore be required to go in the parameters of the box and to check if perhaps the system of key is in WPA / WPA2 . Whenever this is not the case, select this option. Then try to connect your Wiko VIEW 3 pro again to Wifi. Whenever the authentication trouble carries on, we advise that you contact your service provider or a telephone store.