At times, the Wiko Power U10 displays the Authentication Problem message when ever you try to connect to a Wi-Fi network. This kind of error message can potentially come from a lot of places. So, so that you may connect properly to the Wifi network with your Wiko Power U10, we decided to produce this tuto. So we will see together what to do and where to look to solve this issue of Wifi authentication. We will see at first of all what you must do on the Wiko Power U10. Finally, we will see what it is important to do and check on your Wifi box.
How to proceed when the Wiko Power U10 has an authentication problem on the Wifi network
Forget the Wifi network on your Wiko Power U10
If perhaps the Wi-Fi network to which you desire to connect has been changed since your last authentication, your Wiko Power U10 may display the message: Authentication or authentication error . If perhaps the issue comes from there, the answer is quite easy. Just forget about the Wifi network in your Wiko Power U10. To achieve this, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to choose the option: Forget this network . Once it is done, you may try again to connect to the Wifi network. If perhaps the issue is not fixed, go to the next section.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it might happen to have a issue of authentication Wifi on the Wiko Power U10 because the box is not in Synchronization mode . If you want to activate the synchronization mode of your box, it is very basic. You should find a synchronization button to press. When ever this is done, a light will normally start blinking. You can actually then try to reconnect to the Wifi network with your Wiko Power U10. If perhaps it still doesn’t work, go to the next trick.
Retype Security password
At times the authentication problem comes from the way you type the Wifi network security password. Certainly, it is sometimes subtle to type a security password Wifi on its Wiko Power U10. We for that reason advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the security password in uppercase
- Type the security password in lowercase
Restart your box
As in lots of computer problems, the solution is occasionally very simple. Certainly, 80% of the computer problems are solved by restarting the machine. We therefore recommend you to restart your box and your Wiko Power U10. Then try to reconnect with your Wiko Power U10.
Check box settings
If perhaps non-e of the previous answers did work, the problem may perhaps be found to be on the box of your provider. It will for that reason be important to go in the parameters of the box and to test in cases where the system of key is in WPA / WPA2 . If perhaps this is not the circumstance, choose this option. Then try to connect your Wiko Power U10 again to Wifi. If perhaps the authentication issue continues, we advise that you contact your service provider or a telephone retail store.
