The Samsung Galaxy Z Flip3 screen wont turn on anymore

It may happen that we need to use his Samsung Galaxy Z Flip3 and the screen doesn’t turn on anymore. When this happens, it’s very irritating because without a screen, the Samsung Galaxy Z Flip3 is unusable. So that is the kind of problem that needs to be solved very quickly. But do not get worried, the fact that the Samsung Galaxy Z Flip3 screen doesn’t function, doesn’t automatically mean that you have to replace it. To help you and to fix your screen, we decided to write this content. We will first see what you need to control if the screen of your Samsung Galaxy Z Flip3 doesn’t function anymore. We will see secondly what can be the causes of this problem.screen-wont-turn-on-samsung-galaxy-z-flip3

How to proceed if perhaps your Samsung Galaxy Z Flip3 screen wont turn on

Here below are the steps we advise you to do to repair the screen of your Samsung Galaxy Z Flip3.

Make sure your Samsung Galaxy Z Flip3 is fully charged

Yes, we know it’s stupid, however it often happens that this is the origin of the problem. We recommend you to check that your Samsung Galaxy Z Flip3 is well loaded. In fact, it in some cases happens that a cellphone is discharged at once, without being seen coming. So, also if you’re sure your Samsung Galaxy Z Flip3 was loaded before the screen goes off, you need to set it on & nbsp; load. If the screen still doesn’t function, go to the next step.

Make a forced restart of the Samsung Galaxy Z Flip3

Sometimes it takes a forced start to your Samsung Galaxy Z Flip3 for the screen to function. If you wish to do a forced restart, you need to do one of the following two maneuvers:

  • Staying long on the Power button .
  • Hold down the Power button and the Volume Down button for 7 seconds.

Once it is actually done, your Samsung Galaxy Z Flip3 will restart. You will have the ability to see if perhaps the screen starts walking again or not. In case it is not, go to the next step.

Make sure the Samsung Galaxy Z Flip3 screen doesn’t turn on

It can be crucial to know if it is the Samsung Galaxy Z Flip3 screen that doesn’t work anymore. Indeed, it’s also likely that the problem comes on the other hand. To be able to verify if perhaps the screen is dysfunctional, we invite you to restart your Samsung Galaxy Z Flip3. When it starts, you must feel a vibration, hear a noise or the led Samsung Galaxy Z Flip3 should come on. In the event you notice one of these three situations, it proves that the Samsung Galaxy Z Flip3 is started and that the screen doesn’t function. In the event you do not see any of these situations, it indicates that the problem doesn’t necessarily result from the screen.

Change the Samsung Galaxy Z Flip3 screen

Whenever the previous step allowed you to confirm that it is the Samsung Galaxy Z Flip3 screen that doesn’t work, it indicates that it’s a hardware problem. In this circumstance, it will unfortunately be necessary to modify the Samsung Galaxy Z Flip3 screen. For this, we advise you to go to a specific shop.

What can cause a screen that doesn’t turn on a Samsung Galaxy Z Flip3

There can be a multitude of causes which could cause a screen that no longer lights up. Here below are different possibilities.

Samsung Galaxy Z Flip3 took water or moisture?

It often happens that this is the cause of a screen that works badly. Whenever the Samsung Galaxy Z Flip3 took the water or in case you found yourself in an extremely wet environment recently, the problem is coming from there. If so, you can try warming your Samsung Galaxy Z Flip3 with a dryer and pressing hard on the top of the screen. This can in some cases repair the screen.

Has the Samsung Galaxy Z Flip3 fallen?

Whenever your Samsung Galaxy Z Flip3 has fallen recently, or if the screen is cracked, it’s likely that the problem comes from there. We recommend you to go to the retail store to replace the screen.

Have there been other signs

Whenever your Samsung Galaxy Z Flip3 has been executing weird stuff lately, this may have been a sign of a problem with the OS. In fact, if your Samsung Galaxy Z Flip3 goes off by itself, whether it restarts alone or other odd stuff, it is that there is little problem with the OS. In this circumstance, we advise you to make a Factory Reset.