The Motorola One Vision screen wont turn on anymore

It may happen that we need to utilise his Motorola One Vision and the screen doesn’t turn on anymore. Once this happens, it is extremely bothersome because without a screen, the Motorola One Vision is unusable. So that’s the sort of issue that needs to be solved relatively quickly. But do not get worried, the fact that the Motorola One Vision screen will not work, doesn’t automatically mean that you have to replace it. To help you and to fix your screen, we decided to write this content. We will initially see what you need to control if the screen of your Motorola One Vision will not work anymore. We will see secondly what could be the causes of this issue.screen-wont-turn-on-Motorola-One-Vision

What to do in cases where your Motorola One Vision screen wont switch on

Here below are the steps we advise you to do to solve the screen of your Motorola One Vision.

Make sure your Motorola One Vision is fully charged

Yes, we know it’s stupid, nevertheless it quite often happens that this is the origin of the issue. We recommend you to check that your Motorola One Vision is well loaded. Indeed, it in some cases happens that a cellphone is discharged at once, without being seen coming. So, even if you’re sure your Motorola One Vision was loaded before the screen goes off, you have to set it on & nbsp; load. If the screen still will not work, go to the next step.

Make a forced restart of the Motorola One Vision

Sometimes it takes a forced start to your Motorola One Vision for the screen to work. If you want to do a forced restart, you have to do 1 of the following two maneuvers:

  • Staying long on the Power button .
  • Hold down the Power button and the Volume Down button for 7 seconds.

Once it is actually done, your Motorola One Vision will restart. You are going to have the capacity to see in cases where the screen starts walking again or not. If it is not, go to the next section.

Make sure the Motorola One Vision screen doesn’t turn on

It can be necessary to understand if it is the Motorola One Vision screen that will not work anymore. Indeed, it is additionally possible that the problem comes on the other hand. To be able to verify in cases where the screen is dysfunctional, we invite you to restart your Motorola One Vision. Once it starts, you will need to feel a vibration, hear a sound or the led Motorola One Vision should come on. In the event you notice 1 of these 3 cases, it proves that the Motorola One Vision is started and that the screen doesn’t work. In the event you do not see any of these situations, this means that the issue will not necessarily be caused by the screen.

Change the Motorola One Vision screen

In the event that the previous step allowed you to confirm that it is the Motorola One Vision screen that will not work, this means that it is a hardware issue. In this case, it will unfortunately be necessary to change the Motorola One Vision screen. For this, we advise you to go to a specialized shop.

What may cause a screen that will not switch on a Motorola One Vision

There could be a multitude of causes that can cause a screen that no longer lights up. Here below are different possibilities.

Motorola One Vision took water or moisture?

It quite often happens that this is the cause of a screen that works badly. In the event that the Motorola One Vision took the water or in the event you found yourself in an incredibly wet environment recently, the problem is coming from there. If so, you can try warming your Motorola One Vision with a dryer and pressing hard on the top of the screen. This can in some cases repair the screen.

Has the Motorola One Vision fallen?

In the event that your Motorola One Vision has fallen recently, or in the event that the screen is cracked, it is likely that the issue comes from there. We recommend you to go to the store to replace the screen.

Have there been other signs

In the event that your Motorola One Vision has been performing weird things lately, this may have been a sign of a issue with the OS. Indeed, if your Motorola One Vision goes off by itself, whether it restarts alone or other odd things, it is that there is small issue with the OS. In this case, we advise you to make a Factory Reset.