The Motorola edge 30 neo screen wont turn on anymore

It may happen that we need to use his Motorola edge 30 neo and the screen does not turn on anymore. Once this happens, it’s incredibly frustrating because without a screen, the Motorola edge 30 neo is unusable. So that’s the kind of problem that needs to be fixed quite quickly. But do not get worried, the fact that the Motorola edge 30 neo screen doesn’t function, does not automatically mean that you have to replace it. To help you and to fix your screen, we decided to write this content. We will first of all see what you need to control if the screen of your Motorola edge 30 neo doesn’t function anymore. We will see in a second time what could be the causes of this problem.screen-wont-turn-on-motorola-edge-30-neo

How to proceed whenever your Motorola edge 30 neo screen wont turn on

Here below are the steps we recommend you to do to fix the screen of your Motorola edge 30 neo.

Make sure your Motorola edge 30 neo is fully charged

Yes, we know it’s stupid, however it quite often happens that this is the origin of the problem. We recommend you to check that your Motorola edge 30 neo is well loaded. In fact, it at times happens that a smartphone is discharged at when, without being seen coming. So, also if you’re sure your Motorola edge 30 neo was loaded before the screen goes off, you should put it on & nbsp; load. If the screen still doesn’t function, go to the next step.

Make a forced restart of the Motorola edge 30 neo

Sometimes it takes a forced start to your Motorola edge 30 neo for the screen to function. When you want to do a forced restart, you must do 1 of the following two maneuvers:

  • Staying long on the Power button .
  • Hold down the Power button and the Volume Down button for 7 seconds.

Once it can be done, your Motorola edge 30 neo will restart. You are going to have the capacity to see whenever the screen starts walking again or not. When it is not, go to the next section.

Make sure the Motorola edge 30 neo screen does not turn on

It is necessary to find out if it is the Motorola edge 30 neo screen that doesn’t work anymore. Indeed, it’s also likely that the problem comes on the other hand. To be able to verify whenever the screen is dysfunctional, we invite you to restart your Motorola edge 30 neo. Once it starts, you must feel a vibration, hear a noise or the led Motorola edge 30 neo should come on. In the event you notice 1 of these 3 circumstances, it proves that the Motorola edge 30 neo is started and that the screen does not function. In the event you do not see any of these situations, it means that the problem doesn’t necessarily result from the screen.

Change the Motorola edge 30 neo screen

If perhaps the previous step allowed you to confirm that it is the Motorola edge 30 neo screen that doesn’t work, it means that it’s a hardware problem. In this circumstance, it will unfortunately be required to change the Motorola edge 30 neo screen. For this, we advise you to go to a specific shop.

What may induce a screen that doesn’t turn on a Motorola edge 30 neo

There could be a multitude of causes which could induce a screen that no longer lights up. Here below are different possibilities.

Motorola edge 30 neo took water or moisture?

It quite often happens that this is the induce of a screen that works badly. If perhaps the Motorola edge 30 neo took the water or in case you found yourself in an extremely wet environment recently, the problem is coming from there. If that is the case, you can try warming your Motorola edge 30 neo with a dryer and pressing hard on the top of the screen. This can at times repair the screen.

Has the Motorola edge 30 neo fallen?

If perhaps your Motorola edge 30 neo has fallen recently, or if the screen is cracked, it’s likely that the problem comes from there. We recommend you to go to the retail store to replace the screen.

Have there been other signs

If perhaps your Motorola edge 30 neo has been executing weird stuff lately, this may have been a sign of a problem with the OS. In fact, if your Motorola edge 30 neo goes off by itself, whether it restarts alone or other odd stuff, it’s that there is small problem with the OS. In this circumstance, we suggest you to make a Factory Reset.