The Lava Z53 screen wont turn on anymore

It may happen that we need to utilise his Lava Z53 and the screen does not turn on anymore. When this happens, it is incredibly frustrating because without a screen, the Lava Z53 is unusable. So that’s the sort of problem that needs to be resolved very quickly. But do not get worried, the fact that the Lava Z53 screen doesn’t work, does not automatically imply that you have to replace it. To help you and to fix your screen, we decided to draft this article. We will 1st see what you need to control if the screen of your Lava Z53 doesn’t work anymore. We will see on the other hand what might be the causes of this problem.screen-wont-turn-on-Lava-Z53

What to do in cases where your Lava Z53 screen wont turn on

Here below are the steps we advise you to do to fix the screen of your Lava Z53.

Make sure your Lava Z53 is fully charged

Yes, we know it’s stupid, but it often happens that this is the source of the problem. We recommend you to check that your Lava Z53 is well loaded. Indeed, it occasionally happens that a mobile phone is discharged at once, without being seen coming. So, even if you’re sure your Lava Z53 was loaded before the screen goes off, you should set it on & nbsp; load. If the screen still doesn’t work, go to the next step.

Make a forced restart of the Lava Z53

Sometimes it takes a forced start to your Lava Z53 for the screen to work. When you want to do a forced restart, you have to do one of the following two maneuvers:

  • Staying long on the Power button .
  • Hold down the Power button and the Volume Down button for 7 secs.

Once it’s done, your Lava Z53 will restart. You will be capable to see in cases where the screen starts walking again or not. In case it is not, go to the next section.

Make sure the Lava Z53 screen does not turn on

It’s essential to understand if it is the Lava Z53 screen that doesn’t work anymore. Indeed, it is as well likely that the issue comes on the other hand. To be able to verify in cases where the screen is dysfunctional, we invite you to restart your Lava Z53. When it starts, you will need to feel a vibration, hear a noise or the led Lava Z53 should come on. In the event you notice one of these 3 cases, it proves that the Lava Z53 is started and that the screen does not work. In the event you do not see any of these situations, this means that the problem doesn’t necessarily result from the screen.

Change the Lava Z53 screen

In the event that the previous step allowed you to confirm that it is the Lava Z53 screen that doesn’t work, this means that it is a hardware problem. In this circumstance, it will unfortunately be required to modify the Lava Z53 screen. For this, we advise you to go to a specialized shop.

What can induce a screen that doesn’t turn on a Lava Z53

There might be a multitude of causes that may induce a screen that no longer lights up. Here below are diverse possibilities.

Lava Z53 took water or moisture?

It often happens that this is the induce of a screen that works badly. In the event that the Lava Z53 took the water or in case you found yourself in a very wet environment recently, the problem is coming from there. If so, you can try warming your Lava Z53 with a dryer and pressing hard on the top of the screen. This can occasionally repair the screen.

Has the Lava Z53 fallen?

In the event that your Lava Z53 has fallen recently, or if the screen is cracked, it is likely that the problem comes from there. We recommend you to go to the retail store to replace the screen.

Have there been other signs

In the event that your Lava Z53 has been executing weird stuff lately, this may have been a sign of a problem with the OS. Indeed, if your Lava Z53 goes off by itself, whether it restarts alone or other odd stuff, it is that there is tiny problem with the OS. In this circumstance, we advise you to make a Factory Reset.