Sometimes, the Tecno Spark Power displays the Authentication Problem message when you try to connect to a Wi-Fi network. This kind of error message can possibly sourced from several places. So, so that you can actually connect properly to the Wifi network with your Tecno Spark Power, we decided to write this guide. So we will observe together what to do and where to look to solve this problem of Wifi authentication. We will see at 1st what you have to do on the Tecno Spark Power. At last, we will see what it truly is necessary to do and check on your Wifi box.
What to do when the Tecno Spark Power has an authentication problem on the Wifi network
Forget the Wifi network on your Tecno Spark Power
Whenever the Wi-Fi network to which you want to connect has been changed since your last authentication, your Tecno Spark Power may display the text: Authentication or authentication error . Whenever the issue comes from there, the solution is very simple. Just forget about the Wifi network in your Tecno Spark Power. To do this, go to the settings of the Wifi network and keep pressed on the network in question. You will after that have the option to select the option: Forget this network . Once it is carried out, you can actually try again to connect to the Wifi network. In the event that the issue is not resolved, go to the next step.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it might happen to have a issue of authentication Wifi on the Tecno Spark Power because the box is not in Synchronization mode . If you would like to activate the synchronization mode of your box, it truly is very simple. You should find a synchronization button to press. When this is carried out, a light will normally start blinking. You may after that try to reconnect to the Wifi network with your Tecno Spark Power. Whenever it still doesn’t work, go to the next trick.
Retype Security password
Sometimes the authentication problem originates from the way you type the Wifi network password. Indeed, it truly is sometimes subtle to type a password Wifi on its Tecno Spark Power. We for that reason advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the password in uppercase
- Type the password in lowercase
Restart your box
As in many laptop problems, the solution is sometimes very simple. Indeed, 80% of the laptop problems are solved by restarting the machine. We therefore recommend you to restart your box and your Tecno Spark Power. After that try to reconnect with your Tecno Spark Power.
Check box settings
Whenever non-e of the previous answers did work, the problem could possibly be found to be on the box of your provider. It will for that reason be necessary to go in the parameters of the box and to test in the event that the system of key is in WPA / WPA2 . Whenever this is not the case, select this option. After that try to connect your Tecno Spark Power again to Wifi. Whenever the authentication issue remains, we advise that you contact your service provider or a telephone store.
