Sharp Aquos Crystal: Wifi Authentication Problem

Occasionally, the Sharp Aquos Crystal displays the Authentication Problem message when you try to connect to a Wi-Fi network. This kind of error message can potentially come from many places. So, so that you can actually connect properly to the Wifi network with your Sharp Aquos Crystal, we decided to write this tuto. So we will see together what to do and where to look to solve this problem of Wifi authentication. We will see at first what you must do on the Sharp Aquos Crystal. Finally, we will see what it’s important to do and check on your Wifi box.

How to proceed when the Sharp Aquos Crystal has an authentication problem on the Wifi network

Forget the Wifi network on your Sharp Aquos Crystal

Whenever the Wi-Fi network to which you want to connect has been changed since your last authentication, your Sharp Aquos Crystal may display the message: Authentication or authentication error . Whenever the issue comes from there, the solution is fairly simple. Just forget about the Wifi network in your Sharp Aquos Crystal. To get this done, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to select the option: Forget this network . Once it’s done, you can actually try again to connect to the Wifi network. If perhaps the issue is not resolved, go to the next section.

Press the box button

Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may happen to have a issue of authentication Wifi on the Sharp Aquos Crystal because the box is not in Synchronization mode . If you need to activate the synchronization mode of your box, it’s incredibly basic. You should find a synchronization button to press. When this is done, a light will most of the time start blinking. You’re able to then try to reconnect to the Wifi network with your Sharp Aquos Crystal. Whenever it still does not work, go to the next trick.

Retype Security password

Occasionally the authentication problem comes from the way you type the Wifi network password. In truth, it’s sometimes subtle to type a password Wifi on its Sharp Aquos Crystal. We consequently advise you to try all the following possibilities:

  • Type the code without spaces or hyphens
  • Type the password in uppercase
  • Type the password in lowercase

Restart your box

As in a great many laptop problems, the solution is sometimes incredibly simple. In truth, 80% of the laptop problems are solved by restarting the machine. We therefore recommend you to restart your box and your Sharp Aquos Crystal. Then try to reconnect with your Sharp Aquos Crystal.

Check box settings

Whenever non-e of the previous answers did work, the problem might be found to be on the box of your provider. It will consequently be important to go in the parameters of the box and to check in the event that the system of key is in WPA / WPA2 . Whenever this is not the circumstance, select this option. Then try to connect your Sharp Aquos Crystal again to Wifi. Whenever the authentication issue continues, we suggest that you contact your service provider or a telephone retail store.