Sharing the internet connection of Wiko Power U10 in wifi is an incredibly practical feature on the Wiko Power U10. In truth, putting the Wiko Power U10 in modem mode makes it possible to share the connection of the cellphone with your entourage or with your other devices. So, in the event you do not have a suitable Wifi access where you are, we will observe in the following paragraphs how to transform the Wiko Power U10 into a wifi hotspot. We will initially find out how to enable and configure connection sharing. We will find out in a secondary step what is the connection sharing and what it signifies for the Wiko Power U10.
The technique to share the Wiko Power U10 connection
To turn your Wiko Power U10 into a Wi-Fi hotspot, it’s extremely basic. In truth, it is only necessary to carry out two steps. The 1st is to enable connection sharing and the secondary is to configure the network. All you should do is follow the two steps below.
Enable Internet Connection Sharing on Wiko Power U10
To share your Wiko Power U10 net connection, you’ll 1st need to enable connection sharing. To do this, go to the Wiko Power U10 Settings menu . When you’re there, you must go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have 3 choices available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when the Wiko Power U10 is connected to a computer
- Share by using smartphone bluetooth
If you have made your decision, you just have to test to activate the sharing of the Wiko Power U10 connection. When it is active, you should find out a little icon show up in the notifications bar.
Configure Wifi connection sharing on Wiko Power U10
At this point that you’ve set your Wiko Power U10 in modem mode, you’ll need to set up the network so other devices may connect. Just those who have chosen Wi-Fi sharing are affected by the configuration. To configure, click Through Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you’re able to change the password to connect to the Wiko Power U10 network. So, enter the password which you have chosen and confirm. Finally, you’re able to also change the network name in the event you wish.
Connect to the Wiko Power U10 network
At this point that the network is configured, you’re able to connect to it with other devices. To do this, you just need to bring your device and look for the Wiko Power U10 network among the available WIFI networks. If you have found it, you can sign in using the password that you designed. And there you have a decent net connection!
What is Connection Sharing on a Wiko Power U10
To make it basic, sharing a connection means sharing the 3G or 4G connection of the Wiko Power U10 with other devices. So it’s ideal when you do not have a WiFi connection but you have 3G or 4G network on your Wiko Power U10. This enables you to have a good connection almost everywhere. Warning: Realize that Wiko Power U10’s connection share uses mobile data. This implies that the internet usage you are using is deducted from your smartphone plan. Thus, it is possible to configure a limit on the consumption of mobile data. Thus, after a certain limit, the Wiko Power U10 hotspot wifi cuts.
