Sharing the net connection of Tecno Spark 4 Air in wifi is a very handy feature on the Tecno Spark 4 Air. In fact, putting the Tecno Spark 4 Air in modem mode makes it possible to share the connection of the cellphone with your entourage or with your other devices. So, in the event you do not have a suitable Wifi access where you are, we will see in the following paragraphs how to convert the Tecno Spark 4 Air into a wifi hotspot. We will first find out how to enable and configure connection sharing. We will find out in a secondary section what is the connection sharing and what it signifies for the Tecno Spark 4 Air.
The technique to share the Tecno Spark 4 Air connection
To turn your Tecno Spark 4 Air into a Wi-Fi hotspot, it’s very simple. In fact, it is actually only required to execute two steps. The first of all is to enable connection sharing and the secondary is to configure the network. All you need to do is stick to the two steps below.
Enable Net Connection Sharing on Tecno Spark 4 Air
To share your Tecno Spark 4 Air net connection, you’ll first have to enable connection sharing. To achieve this, go to the Tecno Spark 4 Air Settings menu . Once you’re there, you need to go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have 3 choices available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when the Tecno Spark 4 Air is connected to a laptop
- Share by using telephone bluetooth
If you have made your choice, you just have to check to activate the sharing of the Tecno Spark 4 Air connection. When it is active, you should find out a tiny icon show up in the notifications bar.
Set up Wifi connection sharing on Tecno Spark 4 Air
At this point that you have set your Tecno Spark 4 Air in modem mode, you’ll have to set up the network so other devices may connect. Simply those who have opted for Wi-Fi sharing are affected by the configuration. To configure, click Through Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, you can change the password to connect to the Tecno Spark 4 Air network. So, enter the security password which you have chosen and confirm. Finally, you can also modify the network name in the event you wish.
Connect to the Tecno Spark 4 Air network
At this point that the network is configured, you can connect to it with other devices. To achieve this, you just simply have to bring your device and look for the Tecno Spark 4 Air network among the available WIFI networks. If you have found it, you can sign in using the password that you designed. And there you have a great net connection!
What is Connection Sharing on a Tecno Spark 4 Air
To make it simple, sharing a connection means sharing the 3G or 4G connection of the Tecno Spark 4 Air with other devices. So it’s ideal when you do not have a WiFi connection but you have 3G or 4G network on your Tecno Spark 4 Air. This permits you to have a good connection almost everywhere. Warning: Remember that Tecno Spark 4 Air’s connection share uses mobile data. This means that the net usage you are using is deducted from your portable plan. Thus, it’s possible to configure a limit on the consumption of mobile data. Thus, after a certain limit, the Tecno Spark 4 Air hotspot wifi cuts.