Setting up HotSpot or Tethering on Motorola One Vision

Sharing the net connection of Motorola One Vision in wifi is a very practical feature on the Motorola One Vision. Certainly, putting the Motorola One Vision in modem mode afford them the ability to share the connection of the phone with your entourage or with your other devices. So, in case you do not have a suitable Wifi access where you stand, we will see in this article the right way to transform the Motorola One Vision into a wifi hotspot. We will initially find out the right way to turn on and configure connection sharing. We will find out in a secondary section what is the connection sharing and what it implies for the Motorola One Vision.Tethering-HotSpot-Motorola-One-Vision

Tips on how to share the Motorola One Vision connection

To turn your Motorola One Vision into a Wi-Fi hotspot, it’s incredibly simple. Certainly, it’s only required to perform two steps. The 1st is to enable connection sharing and the secondary is to set up the network. All you must do is follow the two steps below.

Enable Net Connection Sharing on Motorola One Vision

To share your Motorola One Vision net connection, you will first need to enable connection sharing. To get this done, go to the Motorola One Vision Settings menu . Once you’re there, you must go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have 3 options available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when ever the Motorola One Vision is connected to a computer
  • Share via telephone bluetooth

When you have made your choice, you just have to test to activate the sharing of the Motorola One Vision connection. When it is active, you should find out a little icon appear in the notifications bar.

Configure Wifi connection sharing on Motorola One Vision

At this point that you’ve set your Motorola One Vision in modem mode, you’ll need to set up the network so other devices can connect. Only those who have chosen Wi-Fi sharing are affected by the configuration. To set up, click Through Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, you can actually change the password to connect to the Motorola One Vision network. So, enter the password which you have chosen and confirm. Finally, you can actually also change the network name in case you wish.

Connect to the Motorola One Vision network

At this point that the network is configured, you can actually connect to it with other devices. To get this done, you just need to bring your device and look for the Motorola One Vision network among the available WIFI networks. When you have found it, you can sign in using the password that you designed. And there you have a decent net connection!

What is Connection Sharing on a Motorola One Vision

To make it simple, sharing a connection means sharing the 3G or 4G connection of the Motorola One Vision with other devices. So it’s ideal when ever you will not have a WiFi connection but you have 3G or 4G network on your Motorola One Vision. This permits you to have a good connection almost everywhere. Warning: Realize that Motorola One Vision’s connection share uses mobile data. It indicates that the net usage you are using is deducted from your portable plan. Thus, it is possible to configure a limit on the consumption of mobile data. Thus, after a certain limit, the Motorola One Vision hotspot wifi turn off.