Setting up HotSpot or Tethering on Motorola Moto G100

Sharing the internet connection of Motorola Moto G100 in wifi is a very handy feature on the Motorola Moto G100. In fact, putting the Motorola Moto G100 in modem mode makes it possible to share the connection of the mobile with your entourage or with your other devices. So, in case you don’t have a suitable Wifi access where you stand, we will observe in this post tips on how to transform the Motorola Moto G100 into a wifi hotspot. We will first observe tips on how to turn on and configure connection sharing. We will observe in a second step what is the connection sharing and what it signifies for the Motorola Moto G100.Tethering-HotSpot-motorola-moto-g100

Tips on how to share the Motorola Moto G100 connection

To turn your Motorola Moto G100 into a Wi-Fi hotspot, it’s extremely straightforward. In fact, it is actually simply required to perform 2 steps. The first is to enable connection sharing and the second is to configure the network. All you have to do is follow the 2 steps below.

Enable Internet Connection Sharing on Motorola Moto G100

To share your Motorola Moto G100 net connection, you will 1st need to enable connection sharing. To get this done, go to the Motorola Moto G100 Settings menu . When you’re there, you need to go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have 3 choices available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when the Motorola Moto G100 is connected to a pc
  • Share via mobile phone bluetooth

If you have made your decision, you just have to check to activate the sharing of the Motorola Moto G100 connection. When it is active, you should observe a small icon show up in the notifications bar.

Set up Wifi connection sharing on Motorola Moto G100

At this point that you have set your Motorola Moto G100 in modem mode, you’ll need to set up the network so other devices may connect. Simply those who have opted for Wi-Fi sharing are affected by the configuration. To configure, click Via Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you may change the password to connect to the Motorola Moto G100 network. So, enter the password of your choice and validate. Finally, you may also change the network name in case you wish.

Connect to the Motorola Moto G100 network

At this point that the network is configured, you may connect to it with other devices. To get this done, you just need to bring your device and look for the Motorola Moto G100 network among the available WIFI networks. If you have found it, you can log in using the password that you designed. And there you have a decent net connection!

What is Connection Sharing on a Motorola Moto G100

To make it basic, sharing a connection means sharing the 3G or 4G connection of the Motorola Moto G100 with other devices. So it’s ideal when you will not have a WiFi connection but you have 3G or 4G network on your Motorola Moto G100. This permits you to have a good connection almost everywhere. Warning: Be aware that Motorola Moto G100’s connection share uses mobile data. It indicates that the internet usage you are using is deducted from your portable plan. Thus, it will be possible to configure a limit on the consumption of mobile data. Thus, after a specific limit, the Motorola Moto G100 hotspot wifi cuts.