Setting up HotSpot or Tethering on Medion Life X6001

Sharing the net connection of Medion Life X6001 in wifi is a very convenient feature on the Medion Life X6001. Indeed, putting the Medion Life X6001 in modem mode makes it possible to share the connection of the phone with your entourage or with your other devices. So, if you don’t have a suitable Wifi access where you stand, we will observe in this article the technique to transform the Medion Life X6001 into a wifi hotspot. We will initially observe the technique to enable and configure connection sharing. We will observe in a second section what is the connection sharing and what it signifies for the Medion Life X6001.Tethering-HotSpot-Medion-Life-X6001

The method to share the Medion Life X6001 connection

To turn your Medion Life X6001 into a Wi-Fi hotspot, it’s extremely straightforward. Indeed, it can be simply necessary to carry out two steps. The 1st is to enable connection sharing and the second is to set up the network. All you should do is follow the two steps below.

Enable Net Connection Sharing on Medion Life X6001

To share your Medion Life X6001 net connection, you’ll 1st have to enable connection sharing. To get this done, go to the Medion Life X6001 Settings menu . Once you’re there, you must go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have three choices available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when the Medion Life X6001 is connected to a computer
  • Share via mobile phone bluetooth

When you have made your choice, you just have to test to activate the sharing of the Medion Life X6001 connection. When it is active, you should observe a small icon show up in the notifications bar.

Configure Wifi connection sharing on Medion Life X6001

At this point that you have set your Medion Life X6001 in modem mode, you’ll have to set up the network so other devices may connect. Simply those who have chosen Wi-Fi sharing are affected by the setup. To set up, click Through Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, you can change the password to connect to the Medion Life X6001 network. So, enter the security password which you have chosen and confirm. At last, you can also modify the network name if you wish.

Connect to the Medion Life X6001 network

At this point that the network is configured, you can connect to it with other devices. To get this done, you just have to bring your system and look for the Medion Life X6001 network among the available WIFI networks. When you have found it, you can log in using the password that you configured. And there you have a good net connection!

What is Connection Sharing on a Medion Life X6001

To make it simple, sharing a connection means sharing the 3G or 4G connection of the Medion Life X6001 with other devices. So it is ideal when you do not have a WiFi connection but you have 3G or 4G network on your Medion Life X6001. This enables you to have a drinking connection almost everywhere. Warning: Be aware that Medion Life X6001’s connection share uses mobile data. This means that the net usage you are using is deducted from your smartphone plan. Thus, it is possible to configure a limit on the consumption of mobile data. Thus, after a specific limit, the Medion Life X6001 hotspot wifi cuts.