Sharing the web connection of Medion Life P4502 in wifi is an extremely handy feature on the Medion Life P4502. Certainly, putting the Medion Life P4502 in modem mode afford them the ability to share the connection of the mobile phone with your entourage or with your other devices. So, in case you dont have a suitable Wifi access where you stand, we will see outlined in this article how you can transform the Medion Life P4502 into a wifi hotspot. We will initially observe how you can turn on and configure connection sharing. We will observe in a secondary section what is the connection sharing and what it signifies for the Medion Life P4502.
Tips on how to share the Medion Life P4502 connection
To turn your Medion Life P4502 into a Wi-Fi hotspot, it’s incredibly basic. Certainly, it can be only required to perform 2 steps. The 1st is to enable connection sharing and the secondary is to set up the network. All you must do is follow the 2 steps below.
Enable Internet Connection Sharing on Medion Life P4502
To share your Medion Life P4502 internet connection, you will first need to enable connection sharing. To accomplish this, go to the Medion Life P4502 Settings menu . When you’re there, you need to go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have three options available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when the Medion Life P4502 is connected to a personal pc
- Share by using cellphone bluetooth
When you have made your decision, you just have to test to activate the sharing of the Medion Life P4502 connection. When it is active, you should observe a little icon appear in the notifications bar.
Configure Wifi connection sharing on Medion Life P4502
At this point that you have set your Medion Life P4502 in modem mode, you’ll need to set up the network so other devices may connect. Only those who have opted for Wi-Fi sharing are affected by the configuration. To set up, click Through Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you can change the password to connect to the Medion Life P4502 network. So, enter the password of your choice and confirm. At last, you can also change the network name in case you wish.
Connect to the Medion Life P4502 network
At this point that the network is configured, you can connect to it with other devices. To accomplish this, you simply need to bring your system and look for the Medion Life P4502 network among the available WIFI networks. When you have found it, you can log in using the password that you configured. And there you have a great internet connection!
What is Connection Sharing on a Medion Life P4502
To make it basic, sharing a connection means sharing the 3G or 4G connection of the Medion Life P4502 with other devices. So it’s ideal when you will not have a WiFi connection but you have 3G or 4G network on your Medion Life P4502. This enables you to have a good connection almost everywhere. Warning: Note that Medion Life P4502’s connection share uses mobile data. This means that the web usage you are using is deducted from your mobile plan. Thus, it’s possible to configure a limit on the consumption of mobile data. Thus, after a certain limit, the Medion Life P4502 hotspot wifi cuts.
