Setting up HotSpot or Tethering on Lenovo Vibe P1m

Sharing the internet connection of Lenovo Vibe P1m in wifi is a very convenient feature on the Lenovo Vibe P1m. In fact, putting the Lenovo Vibe P1m in modem mode can help you to share the connection of the cellphone with your entourage or with your other devices. So, if you do not have a suitable Wifi access where you stand, we will discover outlined in this article the right way to convert the Lenovo Vibe P1m into a wifi hotspot. We will 1st find out the right way to turn on and configure connection sharing. We will find out in a secondary section what is the connection sharing and what it signifies for the Lenovo Vibe P1m.Tethering-HotSpot-Lenovo-Vibe-P1m

Tips on how to share the Lenovo Vibe P1m connection

To turn your Lenovo Vibe P1m into a Wi-Fi hotspot, it’s extremely straightforward. In fact, it is just necessary to perform 2 steps. The first of all is to enable connection sharing and the secondary is to set up the network. All you should do is follow the 2 steps below.

Enable Internet Connection Sharing on Lenovo Vibe P1m

To share your Lenovo Vibe P1m internet connection, you’ll first need to enable connection sharing. To accomplish this, go to the Lenovo Vibe P1m Settings menu . When you’re there, you need to go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have three choices available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when the Lenovo Vibe P1m is connected to a computer
  • Share through mobile phone bluetooth

When you have made your decision, you just have to test to activate the sharing of the Lenovo Vibe P1m connection. When it is active, you should find out a little icon show up in the notifications bar.

Configure Wifi connection sharing on Lenovo Vibe P1m

Now that you’ve set your Lenovo Vibe P1m in modem mode, you’ll need to set up the network so other devices can connect. Just those who have chosen Wi-Fi sharing are affected by the setup. To set up, click Via Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you can change the password to connect to the Lenovo Vibe P1m network. So, enter the password which you have chosen and confirm. At last, you can also change the network name if you wish.

Connect to the Lenovo Vibe P1m network

Now that the network is configured, you can connect to it with other devices. To accomplish this, you simply need to bring your system and look for the Lenovo Vibe P1m network among the available WIFI networks. When you have found it, you can log in using the password that you configured. And there you have a good internet connection!

What is Connection Sharing on a Lenovo Vibe P1m

To make it simple, sharing a connection means sharing the 3G or 4G connection of the Lenovo Vibe P1m with other devices. So it is ideal when you will not have a WiFi connection but you have 3G or 4G network on your Lenovo Vibe P1m. This permits you to have a good connection almost everywhere. Warning: Note that Lenovo Vibe P1m’s connection share uses mobile data. It indicates that the internet usage you are using is deducted from your portable plan. So, it will be possible to configure a limit on the consumption of mobile data. So, after a specific limit, the Lenovo Vibe P1m hotspot wifi turn off.