Setting up HotSpot or Tethering on HUAWEI P30

Sharing the net connection of HUAWEI P30 in wifi is an extremely practical feature on the HUAWEI P30. Indeed, putting the HUAWEI P30 in modem mode afford them the ability to share the connection of the cellphone with your entourage or with your different devices. So, in case you do not have a suitable Wifi access where you are, we will observe in the following paragraphs the method to transform the HUAWEI P30 into a wifi hotspot. We will first find out the method to enable and configure connection sharing. We will find out in a secondary section what is the connection sharing and what it implies for the HUAWEI P30.Tethering-HotSpot-huawei-p30

The technique to share the HUAWEI P30 connection

To turn your HUAWEI P30 into a Wi-Fi hotspot, it’s very simple. Indeed, it truly is just required to execute two steps. The first of all is to enable connection sharing and the secondary is to configure the network. All you should do is stick to the two steps below.

Enable Net Connection Sharing on HUAWEI P30

To share your HUAWEI P30 net connection, you will 1st have to enable connection sharing. To achieve this, go to the HUAWEI P30 Settings menu . When you’re there, you need to go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have 3 choices available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when ever the HUAWEI P30 is connected to a pc
  • Share through cellphone bluetooth

When you have made your decision, you just have to check to activate the sharing of the HUAWEI P30 connection. When ever it is active, you should find out a little icon appear in the notifications bar.

Set up Wifi connection sharing on HUAWEI P30

At this point that you have set your HUAWEI P30 in modem mode, you’ll have to set up the network so other devices may connect. Just those who have chosen Wi-Fi sharing are affected by the configuration. To configure, click Via Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you may change the password to connect to the HUAWEI P30 network. So, enter the password which you have chosen and confirm. Finally, you may also change the network name in case you wish.

Connect to the HUAWEI P30 network

At this point that the network is configured, you may connect to it with other devices. To achieve this, you simply have to bring your device and look for the HUAWEI P30 network among the available WIFI networks. When you have found it, you can log in using the password that you configured. And there you have a good net connection!

What is Connection Sharing on a HUAWEI P30

To make it basic, sharing a connection means sharing the 3G or 4G connection of the HUAWEI P30 with other devices. So it’s ideal when ever you do not have a WiFi connection but you have 3G or 4G network on your HUAWEI P30. This allows you to have a drinking connection almost everywhere. Warning: Note that HUAWEI P30’s connection share uses mobile data. This implies that the net usage you are using is deducted from your téléphone plan. Thus, it’s possible to configure a limit on the consumption of mobile data. Thus, after a specific limit, the HUAWEI P30 hotspot wifi cuts.