Sharing the net connection of Crosscall Trekker-X4 in wifi is an incredibly convenient feature on the Crosscall Trekker-X4. Certainly, putting the Crosscall Trekker-X4 in modem mode makes it possible to share the connection of the cellphone with your entourage or with your different devices. So, if you don’t have a suitable Wifi access where you stand, we will observe in the following paragraphs the technique to transform the Crosscall Trekker-X4 into a wifi hotspot. We will first discover the technique to enable and configure connection sharing. We will discover in a secondary step what is the connection sharing and what it implies for the Crosscall Trekker-X4.
How to share the Crosscall Trekker-X4 connection
To turn your Crosscall Trekker-X4 into a Wi-Fi hotspot, it’s extremely basic. Certainly, it’s just required to carry out two steps. The 1st is to enable connection sharing and the secondary is to configure the network. All you must do is follow the two steps below.
Enable Internet Connection Sharing on Crosscall Trekker-X4
To share your Crosscall Trekker-X4 internet connection, you will 1st have to enable connection sharing. To get this done, go to the Crosscall Trekker-X4 Settings menu . Once you’re there, you must go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have 3 choices available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when ever the Crosscall Trekker-X4 is connected to a pc
- Share via phone bluetooth
If you have made your decision, you just have to check to activate the sharing of the Crosscall Trekker-X4 connection. When it is active, you should discover a tiny icon show up in the notifications bar.
Configure Wifi connection sharing on Crosscall Trekker-X4
Now that you’ve set your Crosscall Trekker-X4 in modem mode, you’ll have to set up the network so other devices can connect. Just those who have chosen Wi-Fi sharing are affected by the setup. To configure, click Through Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, you’re able to change the password to connect to the Crosscall Trekker-X4 network. So, enter the password of your choice and validate. Finally, you’re able to also modify the network name if you wish.
Connect to the Crosscall Trekker-X4 network
Now that the network is configured, you’re able to connect to it with other devices. To get this done, you just simply have to bring your system and look for the Crosscall Trekker-X4 network among the available WIFI networks. If you have found it, you can sign in using the password that you configured. And there you have a decent internet connection!
What is Connection Sharing on a Crosscall Trekker-X4
To make it simple, sharing a connection means sharing the 3G or 4G connection of the Crosscall Trekker-X4 with other devices. So it’s ideal when ever you will not have a WiFi connection but you have 3G or 4G network on your Crosscall Trekker-X4. This permits you to have a drinking connection almost everywhere. Warning: Be aware that Crosscall Trekker-X4’s connection share uses mobile data. It indicates that the net usage you are using is deducted from your téléphone plan. Thus, it’s possible to configure a limit on the consumption of mobile data. Thus, after a certain limit, the Crosscall Trekker-X4 hotspot wifi cuts.
