Setting up HotSpot or Tethering on Crosscall Core-X4

Sharing the internet connection of Crosscall Core-X4 in wifi is an incredibly handy feature on the Crosscall Core-X4. In truth, putting the Crosscall Core-X4 in modem mode afford them the ability to share the connection of the mobile phone with your entourage or with your different devices. So, in case you do not have a suitable Wifi access where you are, we will see in this article how to transform the Crosscall Core-X4 into a wifi hotspot. We will first see how to enable and configure connection sharing. We will see in a second step what is the connection sharing and what it implies for the Crosscall Core-X4.Tethering-HotSpot-crosscall-core-x4

The method to share the Crosscall Core-X4 connection

To turn your Crosscall Core-X4 into a Wi-Fi hotspot, it’s extremely basic. In truth, it’s only required to carry out two steps. The 1st is to enable connection sharing and the second is to configure the network. All you have to do is stick to the two steps below.

Enable Net Connection Sharing on Crosscall Core-X4

To share your Crosscall Core-X4 net connection, you will 1st have to enable connection sharing. To get this done, go to the Crosscall Core-X4 Settings menu . Once you’re there, you have to go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have three options available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when ever the Crosscall Core-X4 is connected to a computer
  • Share via phone bluetooth

If you have made your choice, you just have to check to activate the sharing of the Crosscall Core-X4 connection. When ever it is active, you should see a little icon appear in the notifications bar.

Set up Wifi connection sharing on Crosscall Core-X4

Now that you have set your Crosscall Core-X4 in modem mode, you’ll have to set up the network so other devices can connect. Just those who have chosen Wi-Fi sharing are affected by the setup. To configure, click Through Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, you can actually change the password to connect to the Crosscall Core-X4 network. So, enter the password of your choice and confirm. Finally, you can actually also modify the network name in case you wish.

Connect to the Crosscall Core-X4 network

Now that the network is configured, you can actually connect to it with other devices. To get this done, you simply have to bring your device and look for the Crosscall Core-X4 network among the available WIFI networks. If you have found it, you can sign in using the password that you configured. And there you have a good net connection!

What is Connection Sharing on a Crosscall Core-X4

To make it basic, sharing a connection means sharing the 3G or 4G connection of the Crosscall Core-X4 with other devices. So it is ideal when ever you will not have a WiFi connection but you have 3G or 4G network on your Crosscall Core-X4. This allows you to have a drinking connection almost everywhere. Warning: Note that Crosscall Core-X4’s connection share uses mobile data. It indicates that the internet usage you are using is deducted from your portable plan. Thus, it is possible to configure a limit on the consumption of mobile data. Thus, after a specific limit, the Crosscall Core-X4 hotspot wifi cuts.