Setting up HotSpot or Tethering on Crosscall core M5

Sharing the net connection of Crosscall core M5 in wifi is an incredibly practical feature on the Crosscall core M5. In truth, putting the Crosscall core M5 in modem mode can help you to share the connection of the mobile phone with your entourage or with your different devices. So, in case you don’t have a suitable Wifi access where you stand, we will discover in this post the technique to transform the Crosscall core M5 into a wifi hotspot. We will 1st discover the technique to turn on and configure connection sharing. We will discover in a secondary section what is the connection sharing and what it signifies for the Crosscall core M5.Tethering-HotSpot-crosscall-core-m5

The method to share the Crosscall core M5 connection

To turn your Crosscall core M5 into a Wi-Fi hotspot, it’s incredibly straightforward. In truth, it can be only necessary to execute 2 steps. The 1st is to enable connection sharing and the secondary is to configure the network. All you have to do is stick to the 2 steps below.

Enable Internet Connection Sharing on Crosscall core M5

To share your Crosscall core M5 internet connection, you will first have to enable connection sharing. To achieve this, go to the Crosscall core M5 Settings menu . When you’re there, you have to go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have three options available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when the Crosscall core M5 is connected to a laptop
  • Share via smartphone bluetooth

When you have made your decision, you just have to check to activate the sharing of the Crosscall core M5 connection. When it is active, you should discover a small icon show up in the notifications bar.

Set up Wifi connection sharing on Crosscall core M5

At this point that you have set your Crosscall core M5 in modem mode, you’ll have to set up the network so other devices can connect. Only those who have opted for Wi-Fi sharing are affected by the configuration. To configure, click Via Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you can actually change the password to connect to the Crosscall core M5 network. So, enter the security password which you have chosen and validate. Finally, you can actually also change the network name in case you wish.

Connect to the Crosscall core M5 network

At this point that the network is configured, you can actually connect to it with other devices. To achieve this, you just simply have to bring your system and look for the Crosscall core M5 network among the available WIFI networks. When you have found it, you can log in using the password that you designed. And there you have a great internet connection!

What is Connection Sharing on a Crosscall core M5

To make it simple, sharing a connection means sharing the 3G or 4G connection of the Crosscall core M5 with other devices. So it is ideal when you will not have a WiFi connection but you have 3G or 4G network on your Crosscall core M5. This allows you to have a drinking connection almost everywhere. Warning: Be aware that Crosscall core M5’s connection share uses mobile data. This implies that the net usage you are using is deducted from your portable plan. Thus, it is possible to configure a limit on the consumption of mobile data. Thus, after a specific limit, the Crosscall core M5 hotspot wifi turn off.