Sometimes, the Panasonic Eluga Ray 810 displays the Authentication Problem message when ever you try to connect to a Wi-Fi network. This kind of error message can possibly originate from many places. So, so that you may connect properly to the Wifi network with your Panasonic Eluga Ray 810, we decided to produce this tuto. So we will discover together what to do and where to look to solve this issue of Wifi authentication. We will see at 1st what you must do on the Panasonic Eluga Ray 810. At last, we will see what it can be important to do and check on your Wifi box.
What to do when the Panasonic Eluga Ray 810 has an authentication problem on the Wifi network
Forget the Wifi network on your Panasonic Eluga Ray 810
If the Wi-Fi network to which you desire to connect has been changed since your last authentication, your Panasonic Eluga Ray 810 may display the message: Authentication or authentication error . If the problem comes from there, the answer is quite easy. Simply forget about the Wifi network in your Panasonic Eluga Ray 810. To get this done, go to the settings of the Wifi network and keep pressed on the network in question. You will after that have the option to select the option: Forget this network . When it is carried out, you may try again to connect to the Wifi network. In the event that the problem is not fixed, go to the next section.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may possibly happen to have a problem of authentication Wifi on the Panasonic Eluga Ray 810 because the box is not in Synchronization mode . If you would like to activate the synchronization mode of your box, it can be very basic. You should find a synchronization button to press. When ever this is carried out, a light will normally start blinking. You may after that try to reconnect to the Wifi network with your Panasonic Eluga Ray 810. If it still doesn’t work, go to the next trick.
Retype Security password
Sometimes the authentication problem comes from the solution you type the Wifi network security password. Certainly, it can be sometimes subtle to type a security password Wifi on its Panasonic Eluga Ray 810. We consequently advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the security password in uppercase
- Type the security password in lowercase
Restart your box
As in a great many laptop problems, the solution is from time to time very simple. Certainly, 80% of the laptop problems are solved by restarting the machine. We therefore recommend you to restart your box and your Panasonic Eluga Ray 810. Then try to reconnect with your Panasonic Eluga Ray 810.
Check box settings
If non-e of the previous solutions did work, the problem could possibly be found to be on the box of your provider. It will consequently be important to go in the parameters of the box and to check if perhaps the system of key is in WPA / WPA2 . If this is not the circumstance, select this option. Then try to connect your Panasonic Eluga Ray 810 again to Wifi. If the authentication problem persists, we advise that you contact your service provider or a telephone store.
