Select Page

From time to time, the Nextbit Robin displays the Authentication Problem message when you try to connect to a Wi-Fi network. This sort of error message can possibly result from many places. So, so that you may connect properly to the Wifi network with your Nextbit Robin, we decided to write this tuto. So we will discover together what to do and where to look to resolve this issue of Wifi authentication. We will see at first of all what you need to do on the Nextbit Robin. Finally, we will see what it is required to do and check on your Wifi box.

What to do when the Nextbit Robin has an authentication problem on the Wifi network

Forget the Wifi network on your Nextbit Robin

Whenever the Wi-Fi network to which you want to connect has been changed since your last authentication, your Nextbit Robin may display the text: Authentication or authentication error . Whenever the trouble comes from there, the answer is straightforward. Just forget about the Wifi network in your Nextbit Robin. To accomplish this, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to select the option: Forget this network . Once it’s done, you may try again to connect to the Wifi network. If perhaps the trouble is not solved, go to the next section.

Press the box button

Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it might happen to have a trouble of authentication Wifi on the Nextbit Robin because the box is not in Synchronization mode . If you would like to activate the synchronization mode of your box, it is very basic. You should find a synchronization button to press. When ever this is done, a light will normally start blinking. You may then try to reconnect to the Wifi network with your Nextbit Robin. Whenever it still will not work, go to the next trick.

Retype Security password

From time to time the authentication problem originates from the technique you type the Wifi network password. In truth, it is sometimes subtle to type a password Wifi on its Nextbit Robin. We therefore advise you to try all the following possibilities:

  • Type the code without spaces or hyphens
  • Type the password in uppercase
  • Type the password in lowercase

Restart your box

As in several computer problems, the solution is at times very simple. In truth, 80% of the computer problems are solved by restarting the machine. We therefore advise you to restart your box and your Nextbit Robin. After that try to reconnect with your Nextbit Robin.

Check box settings

Whenever non-e of the previous answers did work, the problem could possibly be found to be on the box of your provider. It will therefore be required to go in the parameters of the box and to test in the event that the system of key is in WPA / WPA2 . Whenever this is not the circumstance, select this option. After that try to connect your Nextbit Robin again to Wifi. Whenever the authentication trouble carries on, we advise that you contact your service provider or a telephone retail store.