Logicom Moov: Wifi Authentication Problem

At times, the Logicom Moov displays the Authentication Problem message when ever you try to connect to a Wi-Fi network. This kind of error message can potentially come from several places. So, so that you can connect properly to the Wifi network with your Logicom Moov, we decided to produce this guide. So we will observe together what to do and where to look to resolve this problem of Wifi authentication. We will see at first of all what you need to do on the Logicom Moov. At last, we will see what it’s necessary to do and check on your Wifi box.

How to proceed when the Logicom Moov has an authentication problem on the Wifi network

Forget the Wifi network on your Logicom Moov

In the event that the Wi-Fi network to which you wish to connect has been changed since your last authentication, your Logicom Moov may display the message: Authentication or authentication error . In the event that the issue comes from there, the answer is fairly simple. Simply forget about the Wifi network in your Logicom Moov. To accomplish this, go to the settings of the Wifi network and keep pressed on the network in question. You will after that have the option to select the option: Forget this network . Once it’s done, you can try again to connect to the Wifi network. In the event that the issue is not solved, go to the next section.

Press the box button

Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may happen to have a issue of authentication Wifi on the Logicom Moov because the box is not in Synchronization mode . If you would like to activate the synchronization mode of your box, it’s extremely basic. You should find a synchronization button to press. When this is done, a light will normally start blinking. You can actually after that try to reconnect to the Wifi network with your Logicom Moov. In the event that it still doesn’t work, go to the next trick.

Retype Security password

At times the authentication problem originates from the technique you type the Wifi network password. In fact, it’s sometimes subtle to type a password Wifi on its Logicom Moov. We for that reason advise you to try all the following possibilities:

  • Type the code without spaces or hyphens
  • Type the password in uppercase
  • Type the password in lowercase

Restart your box

As in many pc problems, the solution is at times extremely simple. In fact, 80% of the pc problems are solved by restarting the machine. We therefore recommend you to restart your box and your Logicom Moov. After that try to reconnect with your Logicom Moov.

Check box settings

In the event that non-e of the previous solutions did work, the problem may be found to be on the box of your provider. It will for that reason be necessary to go in the parameters of the box and to test whenever the system of key is in WPA / WPA2 . In the event that this is not the circumstance, select this option. After that try to connect your Logicom Moov again to Wifi. In the event that the authentication issue carries on, we advise that you contact your service provider or a telephone retail store.