Lava Z62: Wifi Authentication Problem

Oftentimes, the Lava Z62 displays the Authentication Problem message when you try to connect to a Wi-Fi network. This kind of error message can possibly result from several places. So, so that you’re able to connect properly to the Wifi network with your Lava Z62, we decided to write this guide. So we will see together what to do and where to look to resolve this issue of Wifi authentication. We will see at initially what you must do on the Lava Z62. At last, we will see what it is important to do and check on your Wifi box.

What to do when the Lava Z62 has an authentication problem on the Wifi network

Forget the Wifi network on your Lava Z62

If the Wi-Fi network to which you wish to connect has been changed since your last authentication, your Lava Z62 may display the text message: Authentication or authentication error . If the trouble comes from there, the answer is straightforward. Just forget about the Wifi network in your Lava Z62. To get this done, go to the settings of the Wifi network and keep pressed on the network in question. You will after that have the option to select the option: Forget this network . Once it is carried out, you’re able to try again to connect to the Wifi network. If perhaps the trouble is not fixed, go to the next section.

Press the box button

Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may possibly happen to have a trouble of authentication Wifi on the Lava Z62 because the box is not in Synchronization mode . If you need to activate the synchronization mode of your box, it is extremely basic. You should find a synchronization button to press. When this is carried out, a light will normally start blinking. You can actually after that try to reconnect to the Wifi network with your Lava Z62. If it still doesn’t work, go to the next trick.

Retype Security password

Oftentimes the authentication problem comes from the way you type the Wifi network security password. In fact, it is sometimes subtle to type a security password Wifi on its Lava Z62. We therefore advise you to try all the following possibilities:

  • Type the code without spaces or hyphens
  • Type the security password in uppercase
  • Type the security password in lowercase

Restart your box

As in many computer problems, the solution is sometimes extremely simple. In fact, 80% of the computer problems are solved by restarting the machine. We therefore recommend you to restart your box and your Lava Z62. Then try to reconnect with your Lava Z62.

Check box settings

If non-e of the prior solutions did work, the problem might be found to be on the box of your provider. It will therefore be important to go in the parameters of the box and to test in the event that the system of key is in WPA / WPA2 . If this is not the case, select this option. Then try to connect your Lava Z62 again to Wifi. If the authentication trouble continues, we suggest that you contact your service provider or a telephone retail store.