Sometimes the Crosscall Core-Z5 is not well configured and has problem reading MMS. Indeed, it will be possible that once you get an MMS on your Crosscall Core-Z5, it offers you to download it. Also clicking download, it does not always read. Thus, to read MMS correctly and that they appear in your discussions, you need to configure MMS. We will learn about donations as a first section what are the prerequisites to configure playback of your MMS. We’ll see in a second time the right way to play MMS on your Crosscall Core-Z5 by configuring a new APN.
Prerequisites for setting up and reading MMS on Crosscall Core-Z5
In order to be capable to configure the reception of MMS on your Crosscall Core-Z5, we recommend you to set in good conditions. To do this, first be sure to have a mobile phone loaded. Secondary, you must disable the Wifi connection of your Crosscall Core-Z5, to be able to be connected to the mobile data of your operator. At last, make sure you have a good network where you are once you do the manipulation. If all is well, you’re able to start & nbsp; the APN configuration on your Crosscall Core-Z5 by moving on to the next step.
Ways to read MMS on Crosscall Core-Z5
In order to read MMS on your Crosscall Core-Z5, you have to proceed in 2 steps. Certainly, the 1st is to recover the important info for the creation of the APN at your operator. The second is merely to create the APN.
Retrieve the important info from the operator
As seen before, it will be necessary to create an APN to be able to read the MMS on your Crosscall Core-Z5. It is not very complicated, nevertheless you will need more info according to your operator. Whether you are at Orange, Bouygues or SFR, it can be easy to find this info. To do this, just type APN MMS configuration + the name of your operator in Google. You will need to therefore retrieve info of type: Name / APN / Proxy / etc… Once you have the info, go to the next section.
Create an access point to read and send MMS on Crosscall Core-Z5
The last section in order to read MMS on your Crosscall Core-Z5 is the creation of the camera. To do this, you must go to the Settings menu in Crosscall Core-Z5, then Mobile Networks , and lastly Access Point Names . Once you are there, you have to create a new camera. It is in this page that you have to enter all the info you have collected in the previous section. When everything is back, you just have to register and activate. You can then do a test to see if it works well.
