Occasionally the Crosscall Core-X4 is not well configured and has issue reading MMS. In truth, it’s possible that when you receive an MMS on your Crosscall Core-X4, it offers you to download it. Even clicking download, it does not always read. Thus, to read MMS properly and that they appear in your conversations, you should set up MMS. We will see donations as a first step what are the prerequisites to set up playback of your MMS. We will see on the other hand how to play MMS on your Crosscall Core-X4 by configuring a new APN.
Prerequisites for setting up and reading MMS on Crosscall Core-X4
In order to be able to set up the reception of MMS on your Crosscall Core-X4, we suggest you to put in good conditions. To achieve this, first of all ensure that you have a telephone loaded. Secondary, you need to disable the Wifi connection of your Crosscall Core-X4, in order to be connected to the mobile data of your operator. Finally, make sure you have a good network where you are when you do the manipulation. If all is well, you may start & nbsp; the APN configuration on your Crosscall Core-X4 by moving on to the next step.
How to read MMS on Crosscall Core-X4
In order to read MMS on your Crosscall Core-X4, you must proceed in 2 steps. In fact, the 1st is to recover the important info for the creation of the APN at your operator. The second is merely to create the APN.
Retrieve the important info from the operator
As seen previously, it will likely be necessary to create an APN to be able to read the MMS on your Crosscall Core-X4. It’s not extremely complicated, however you will need more info according to your operator. Whether you are at Orange, Bouygues or SFR, it is easy to find this info. To get this done, only type APN MMS configuration + the name of your operator in Google. You need to therefore retrieve info of type: Name / APN / Proxy / etc… Once you have the info, go to the next step.
Create an access point to read and send pictures on Crosscall Core-X4
The last step to be able to read MMS on your Crosscall Core-X4 is the creation of the camera. To achieve this, you need to go to the Settings menu in Crosscall Core-X4, after that Mobile Networks , and lastly Access Point Names . Once you are there, you must create a new camera. It is in this page that you must enter all the info you have collected in the previous step. When everything is back, you only have to register and activate. You can after that do a test to see if it functions well.