How to open and remove the shell on LG V10

by

Opening the LG V10 and removing its hull can be a really practical procedure in lots of cases. If you need to insert a SIM card or an SD memory card, you might have to remove the cover and open the LG V10. Opening the LG V10 is also important when you need to remove the battery or when you desire to dust off the inside of your phone. We will first see how to find the point that allows to open the hull of LG V10. We will find out in a second section how to open the hull of LG V10.remove-shell-LG-V10

Finding the opening point of LG V10

If you need to open your LG V10, the first step is to find the opening point of the hull. To do this, we recommend you to refer to the operating instructions of your LG V10. In the event you don’t have the user manual of your LG V10, you may find it on the internet. Most of the time, the procedure of removing the hull is to slide the hull or to unclip it. Nonetheless, we recommend you to be vigilant when doing this step, in order not to damage your LG V10. After you have found the opening point of the hull, you will finally have the ability to open your LG V10.

Open the LG V10

When you know where the LG V10 opening point is, you will be able to start opening the rear part of the hull. To do this slide or boot the rear part of the shell according to the model of your LG V10. When it can be done, half of the hull is removed. This should enable you to access the battery and perhaps the SIM card of your LG V10. If you need to remove the front part of the hull of the mobile phone, be aware that it can be a bit more complex. For this, we recommend you to go in store or in specific shop.

The safety measures to be taken when opening the LG V10

You should know that the hull of the LG V10 protects the sensitive elements that are inside the phone. So, in case you decide to open the LG V10, you need to handle the mobile phone carefully. Indeed, the elements such as the battery, the printed circuit boards or the SIM card are sensitive. Do not allow dust or moisture to get inside the phone. Install in a clean environment to accomplish this.