Opening the Archos and removing its hull may be an extremely practical procedure in lots of circumstances. If you want to insert a SIM card or an SD memory card, you may possibly need to remove the cover and open the Archos. Opening the Archos is also important when you wish to remove the battery or when you desire to dust off the inside of your phone. We will first see the right way to find the point that allows to open the hull of Archos. We will find out in a secondary section how you can open the hull of Archos.
Finding the opening point of Archos
If you want to open your Archos, the first step is to find the opening point of the hull. To achieve this, we advise you to consult the operating instructions of your Archos. In the event you dont have the user manual of your Archos, you can actually locate it on the web. Most of the time, the technique of removing the hull is to slide the hull or to unclip it. However, we advise you to be vigilant when doing this step, in order not to damage your Archos. When you have found the opening point of the hull, you will at last have the ability to open your Archos.
Open the Archos
When you know where the Archos opening point is, you will have the capacity to start opening the back part of the hull. To achieve this slide or boot the rear part of the shell in accordance to the model of your Archos. When it’s done, half of the hull is removed. This should permit you to access the battery and possibly the SIM card of your Archos. If you want to remove the front part of the hull of the cellphone, understand that it’s a little more complicated. For this, we advise you to go in store or in specific shop.
The safety measures to be taken when opening the Archos
You should know that the hull of the Archos protects the sensitive components that are inside the telephone. So, in the event you decide to open the Archos, you will need to handle the cellphone cautiously. Certainly, the elements just like the battery, the printed circuit boards or the SIM card are sensitive. Do not allow dust or moisture to get inside the telephone. Install in a clean environment to achieve this.
