Inserting the SIM card into your ZTE Blade 10 Prime is important if you need to use your telephone. Indeed, the SIM card will allow your ZTE Blade 10 Prime to be able to connect to the mobile network and consequently to make phone calls. Nonetheless, if you just bought your ZTE Blade 10 Prime, it can be not always easy to find out how you can put the SIM card. That is why we made the decision to write this content. We will first see how to proceed before inserting the SIM card in the ZTE Blade 10 Prime. We will discover how you can insert the SIM card. Finally, we will observe what the diverse types of SIM card.
What to do before putting the SIM into your ZTE Blade 10 Prime
Before you start inserting the SIM card into your ZTE Blade 10 Prime, it can be necessary to test 2 or 3 stuff. 1st of all, we suggest you to switch off the ZTE Blade 10 Prime before you put the SIM card. We also advise you to test if the type of SIM card you have corresponds to the model of your phone. Indeed, there are many types of SIM cards and every cellphone is compatible with a specific type. Refer to the last section of this content for more information. At last, in cases where the location of the SIM card of your ZTE Blade 10 Prime is on the side, we advise that you have a pin or a thin and sharp object to open the slot for SIM. If you need to change the PIN code of the SIM card, please refer to our guide to change the PIN code on ZTE Blade 10 Prime.
Tips on how to insert the SIM card into the ZTE Blade 10 Prime
Based on the model of your ZTE Blade 10 Prime, there are two likely methods for inserting the SIM card. The right procedure should consequently be 1 of the following.
Technique 1: Insert the SIM card by the side of your ZTE Blade 10 Prime
To insert the SIM card into your ZTE Blade 10 Prime, first find the slot that is usually on the side of the phone. It is quite simple to spot it because there is often a small hole next to it. If you have found it, you will have to insert a pointed object into the small hole next to the slot. One example is, you can use a paper clip to do so. By pushing into the hole, the SIM card rack should come out. You should then remove the rack from the slot. Simply insert the SIM card into this rack and re-insert it into your ZTE Blade 10 Prime. That is it!
Technique 2: Insert the SIM card from the back of the ZTE Blade 10 Prime
If your ZTE Blade 10 Prime doesn’t have a slot on the side, this means that the SIM slot is on the back of the phone. The first step are going to be to turn off the cache on the back of the ZTE Blade 10 Prime. To do this, you just simply have to unfasten it with your fingertips. Once completed, you should observe the location of the SIM card. Oftentimes the location is under the battery. In this case, you should turn off the battery. All you have to do is insert the SIM card into your ZTE Blade 10 Prime. Be careful to put it in the right direction, the gold side of the card need to be down. Reassemble everything and it’s good!
The different types of SIM cards
There are 3 diverse types of SIM cards. Indeed, these 3 types differ according to their size. We thus find:
- The SIM card: which is of standard size.
- The Micro SIM card: that is more compact than the standard size.
- The Nano SIM card: which is really extremely small. The chip covers nearly the entire surface.
If you do not have the right SIM card for your ZTE Blade 10 Prime, you can ask your operator for another 1. There are as well adapters which could solve compatibility issues. At last, when you have a standard SIM card, it may be cut to make it into Micro SIM or Nano SIM. At your peril.
