How to fix Kazam Tornado 2 black screen

Sometimes the display screen of Kazam Tornado 2 stays black. This trouble can happen in several situations. Oftentimes it happens after the Kazam Tornado 2 falls. Other times, the screen stays black after a start, lock, or sleep. Whatever the case, don’t be anxious, you will find several tips to resolve the black screen of your Kazam Tornado 2. For that, it will be necessary to check several points just before attempting the different techniques. We will find out at first what things to check when the screen of Kazam Tornado 2 remains black. We will find out in a second time all the tricks to unlock this awful black display screen.black-screen-Kazam-Tornado-2

What should you watch if you have a black screen on Kazam Tornado 2

Before embarking on the techniques, we recommend you to check the points below in order to better understand where the trouble can form. This will deliver you good indications of the nature of the trouble.

Is the Kazam Tornado 2 LED on when the display screen remains black?

One of the first of all points to check is the little led that is at the top of your display screen. If the LED is red or blue when the Kazam Tornado 2 display screen remains black, it signifies that the phone is switched on. In such a case, it is extremely probably that the trouble comes from the display screen.

Is the Kazam Tornado 2 charged?

Sometimes, a deep battery discharge prevents the Kazam Tornado 2 from turning on for quite a while. Ensure that the Kazam Tornado 2 is completely recharged by leaving it connected for at least one hour. In the event that after this the LED does not light up and the display screen stays black, the trouble can potentially originate from the battery.

Is the Kazam Tornado 2 damaged?

If the Kazam Tornado 2 display screen remains black after shock, after dropping , after being wet , or after cracking , the screen can be harmed. In such a case, none of the tricks listed below will do the job. You will then have to bring your Kazam Tornado 2 to a repairshop.

What to do when the Kazam Tornado 2 screen stays black?

After looking at that the trouble comes from the display screen, you can try the next ideas to unlock the black display screen of your Kazam Tornado 2. If a method does not do the job, look at the next one.

Plug the Kazam Tornado 2 into its charger

The 1st thing to do when the display screen of Kazam Tornado 2 remains black is to put the mobile phone on. This will make it feasible to be serene for any following manipulations. This additionally resolves the possible trouble of a deep discharge of the mobile phone battery.

If it is possible, take away the battery from the Kazam Tornado 2

If the Kazam Tornado 2 is easily detachable, we recommend you to remove the battery . This sometimes solves the black display screen trouble. Hold out a few seconds, then turn the battery back on and make an attempt to start the mobile phone. In the event that the display screen is still blocked, look at the next step.

Remove SIM card and SD card

It sometimes occurs, without explanation, that the SIM card or the SD card conflicts with Kazam Tornado 2 and causes a black display screen. 1 of the tricks to try is to take away the SIM card and the SD card. Once it’s carried out, you should try to start the phone. In the event that it works, it means there is a conflict with the SIM or SD card.

Force Kazam Tornado 2 to reboot

If the display screen stays black, the trouble often solves with a forced reboot . To accomplish this, you simply must press a number of keys simultaneously. You need to stay at least TEN seconds for the forced reboot to work. The key combo depends upon the models but had to be one of the subsequent:

  • low volume + power button
  • low volume + power button + cough Home
  • high volume + power button
  • volume top + touch power + cough Home
  • touch power + cough Home

Hang on until the battery is empty

At last, if perhaps none of the previously mentioned solutions do the job, you can try to let your battery discharge. Be sure the battery is completely empty. Once it is finished, plug your Kazam Tornado 2 into its power adaptor and try to start the Kazam Tornado 2.