How to fix Crosscall Trekker-X4 black screen

From time to time the screen of Crosscall Trekker-X4 stays black. This situation may appear in several circumstances. Sometimes it happens after the Crosscall Trekker-X4 falls. Other times, the screen stays black after a start, lock, or sleep. No matter the reason, do not worry, you will find many tips to resolve the black screen of your Crosscall Trekker-X4. For that, it’ll be necessary to check several stuff just before trying the different solutions. We will discover at primary what things to check when the screen of Crosscall Trekker-X4 remains black. We will discover in a second time all the tricks to unlock this bad black screen.black-screen-crosscall-trekker-x4

What should you check out in case you have a black screen on Crosscall Trekker-X4

Before embarking on the techniques, we recommend you to check the things below to be able to better understand where the trouble can form. This will provide you good clues of the nature of the trouble.

Is the Crosscall Trekker-X4 LED on when the screen remains black?

One of the first of all stuff to check is the little led that is on top of your screen. If perhaps the LED is red or blue when the Crosscall Trekker-X4 screen remains black, it implies that the phone is turned on. In this instance, it is highly likely that the trouble comes from the screen.

Is the Crosscall Trekker-X4 charged?

From time to time, a deep battery discharge prevents the Crosscall Trekker-X4 from turning on for some time. Be sure the Crosscall Trekker-X4 is entirely charged by leaving it connected for at least 1 hour. If perhaps after this the LED doesn’t illuminate and the screen stays black, the trouble can potentially originate from the electric battery.

Is the Crosscall Trekker-X4 damaged?

If the Crosscall Trekker-X4 screen remains black after shock, after dropping , after being wet , or after cracking , the screen might be harmed. In this instance, probably none of the techniques below will work. You will then have to bring your Crosscall Trekker-X4 to a repairman.

What to do when the Crosscall Trekker-X4 screen stays black?

After examining that the trouble emanates from the screen, you can actually try the next ideas to unlock the black screen of your Crosscall Trekker-X4. If a method doesn’t work, check out the next one.

Plug the Crosscall Trekker-X4 into its charger

The very 1st thing to accomplish when the screen of Crosscall Trekker-X4 remains black is to put the mobile phone on. This will make it feasible to be peaceful for all subsequent manipulations. This additionally handles the possible trouble of a deep discharge of the mobile phone electric battery.

Whenever possible, remove the electric battery from the Crosscall Trekker-X4

If the Crosscall Trekker-X4 is easily removable, we recommend you to remove the electric battery . This occasionally solves the black screen trouble. Wait a few seconds, then turn the battery back on and make an attempt to start the mobile phone. If the screen is still blocked, check out the next step.

Remove SIM card and SD card

It occasionally occurs, without justification, that the SIM card or the SD card conflicts with Crosscall Trekker-X4 and causes a black screen. One of the techniques to try is to remove the SIM card and the SD card. Once it’s carried out, you should try to start the phone. If it works, it means there is a conflict with the SIM or SD card.

Force Crosscall Trekker-X4 to reboot

If the screen stays black, the trouble often resolves with a forced reboot . To do this, you need to press several keys at the same time. You will need to remain at least TEN seconds for the forced reboot to run. The key combination will depend on the versions but had to be 1 of the subsequent:

  • low volume + power button
  • low volume + power button + cough Home
  • high volume + power button
  • volume top + touch power + cough Home
  • touch power + cough Home

Hang on until the electric battery is empty

At last, if not one of the previously mentioned méthodes work, you can actually try to let your electric battery discharge. Make sure the electric battery is totally empty. Once it’s performed, plug your Crosscall Trekker-X4 into its charger and try to start the Crosscall Trekker-X4.