How to fix Blackview BL6000 black screen

In some cases the display screen of Blackview BL6000 stays black. This problem can happen in many situations. Oftentimes it occurs after the Blackview BL6000 falls. Other times, the screen stays black after a start, lock, or sleep. Whatever the case, don’t worry, you will discover many tricks to fix the black screen of your Blackview BL6000. For that, it will probably be important to examine several things just before attempting the diverse techniques. We will discover at first what things to check when the screen of Blackview BL6000 remains black. We will discover in a second time all the tricks to be able to unlock this awful black display screen.black-screen-blackview-bl6000

What should you watch when you have a black screen on Blackview BL6000

Before embarking on the tricks, we suggest you to examine the points below in order to better understand where the issue can form. This will give you good indications of the nature of the issue.

Is the Blackview BL6000 LED on when the display screen remains black?

One of the 1st things to examine is the small led that is at the top of your display screen. If perhaps the LED is red or blue when the Blackview BL6000 display screen remains black, it indicates that the mobile is switched on. In such cases, it is highly likely that the issue originates from the display screen.

Is the Blackview BL6000 charged?

Sometimes, a deep battery discharge prevents the Blackview BL6000 from turning on for a time. Make sure the Blackview BL6000 is fully charged by leaving it connected for at least 1 hour. If after that the LED doesn’t illuminate and the display screen stays black, the issue can potentially originate from the battery.

Is the Blackview BL6000 damaged?

If the Blackview BL6000 display screen remains black after shock, after dropping , after being wet , or after breaking , the screen could be broken. In such cases, probably none of the tricks below will function. You will then have to bring your Blackview BL6000 to a repairman.

What you can do when the Blackview BL6000 screen stays black?

After looking at that the issue comes from the display screen, you can actually try the following tips to unlock the black display screen of your Blackview BL6000. If a technique doesn’t function, look at the following one.

Plug the Blackview BL6000 into its charger

The first thing to accomplish when the display screen of Blackview BL6000 remains black is to put the mobile on. This will make it possible to be peaceful for all subsequent manipulations. This also handles the possible issue of a deep discharge of the mobile battery.

If you can, take away the battery from the Blackview BL6000

If the Blackview BL6000 is easily detachable, we suggest you to remove the battery . This from time to time handles the black display screen issue. Hold out a couple of seconds, then turn the battery back on and make an attempt to start the mobile. In the event that the display screen is still blocked, look at the following step.

Remove SIM card and SD card

It from time to time occurs, without justification, that the SIM card or the SD card conflicts with Blackview BL6000 and causes a black display screen. One of the tricks to try is to take away the SIM card and the SD card. Once it’s performed, you ought to try to start the cellphone. In the event that it works, it means there is a conflict with the SIM or SD card.

Force Blackview BL6000 to reboot

If the display screen stays black, the issue often resolves with a forced reboot . To get this done, you must press a number of keys simultaneously. You must remain at least 10 seconds for the forced reboot to run. The key combo will depend on the models but had to be 1 of the following:

  • low volume + power button
  • low volume + power button + cough Home
  • high volume + power button
  • volume top + touch power + cough Home
  • touch power + cough Home

Wait until the battery is empty

Finally, if not one of the above procédures work, you can actually try to let your battery discharge. Make sure the battery is totally empty. Once it is performed, plug your Blackview BL6000 into its power adaptor and try to start the Blackview BL6000.