Occasionally the screen of Blackview A100 stays black. This problem may appear in a lot of circumstances. Sometimes it occurs after the Blackview A100 falls. Other times, the screen stays black after a start, lock, or sleep. In any case, do not be anxious, there are several methods to fix the black screen of your Blackview A100. For that, it’s going to be needed to verify several stuff just before attempting the different methods. We will see at primary what things to examine when the screen of Blackview A100 remains black. We will see in a second time all the tricks to be able to unlock this horrible black screen.
What should you watch in case you have a black screen on Blackview A100
Before embarking on the techniques, we suggest you to verify the things below in order to better understand where the issue can form. This will give you good indications of the nature of the issue.
Is the Blackview A100 LED on when the screen remains black?
One of the first of all stuff to verify is the tiny led that is on the top of your screen. In the event that the LED is red or blue when the Blackview A100 screen remains black, it signifies that the telephone is started. In such cases, it is extremely likely that the issue originates from the screen.
Is the Blackview A100 charged?
Occasionally, a deep battery discharge prevents the Blackview A100 from turning on for some time. Make sure the Blackview A100 is entirely recharged by leaving it connected for at least 1 hour. If perhaps after this the LED doesn’t light and the screen stays black, the issue can probably result from the battery.
Is the Blackview A100 damaged?
If the Blackview A100 screen remains black after shock, after falling , after being wet , or after damage , the screen might be broken. In such cases, not one of the tricks below will work. You will then have to bring your Blackview A100 to a repairman.
How to proceed when the Blackview A100 screen stays black?
After checking out that the issue emanates from the screen, you can actually try the next tips to unlock the black screen of your Blackview A100. If a technique doesn’t work, look at the next one.
Plug the Blackview A100 into its charger
The very first thing to perform when the screen of Blackview A100 remains black is to put the mobile on. This will make it feasible to be peaceful for all following manipulations. This also solves the possible issue of a deep discharge of the mobile battery.
If you can, take out the battery from the Blackview A100
If the Blackview A100 is easily detachable, we suggest you to remove the battery . This sometimes solves the black screen issue. Hold out some seconds, then turn the battery back on and make an attempt to start the mobile. If perhaps the screen is still blocked, look at the next step.
Remove SIM card and SD card
It sometimes occurs, without explanation, that the SIM card or the SD card conflicts with Blackview A100 and triggers a black screen. One of the tricks to try is to take out the SIM card and the SD card. Once it’s completed, it is advisable to try to start the phone. If perhaps it works, it signifies there is a conflict with the SIM or SD card.
Force Blackview A100 to restart
If the screen stays black, the issue often solves with a forced restart . To achieve this, you need to press a number of keys simultaneously. You need to stay at least TEN seconds for the forced restart to run. The key combo is determined by the models but had to be 1 of the following:
- low volume + power button
- low volume + power button + cough Home
- high volume + power button
- volume top + touch power + cough Home
- touch power + cough Home
Hang on until the battery is empty
Finally, if perhaps not one of the above méthodes work, you can actually try to let your battery discharge. Be sure the battery is entirely empty. Once it’s done, plug your Blackview A100 into its charger and try to start the Blackview A100.
