Whether in the wc or in a pool, it sometimes occurs that the ZTE Blade A310 is dropped in the water. However, it isn’t simply because a phone has fallen in the water that it’s obviously dead. Indeed, it is possible to redo an ZTE Blade A310 that has fallen in the water. To do this, it is needed to respect certain steps. People generally have bad reflexes and this is what can degrade the ZTE Blade A310. We will 1st discover the steps to be taken after the ZTE Blade A310 has fallen into the water. We will discover in the 2nd place the common mistakes that most people make.
Steps to follow if your ZTE Blade A310 fell into the water
Whenever you need to restore your ZTE Blade A310 in operating order, we recommend that you follow the steps listed below.
Don’t try to turn the ZTE Blade A310 back on after exiting the water
The very first thing to accomplish when the ZTE Blade A310 has fallen into the water is to switch off the phone. Indeed, if it did not switch off, turn it off without doing any other tricks. In the event that it is already off, do not try to turn it back on for the moment. In the event that the ZTE Blade A310 is switched on and wet, you may generate a short circuit and consequently toast the phone.
Remove detachable components
When the ZTE Blade A310 is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it will be needed to take away the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these items to dry and continue to the following step.
Aspire the water that is in your ZTE Blade A310
Utilizing a straw, you will have to suck up the water that is contained in your ZTE Blade A310. For doing it, you just need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your ZTE Blade A310, you will have the ability to start drying it.
Dry the ZTE Blade A310
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using procédures that cause the phone to heat up or damage the phone. When it is performed, we suggest you to leave the ZTE Blade A310 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the ZTE Blade A310.
Reassemble the components and turn on the ZTE Blade A310
When you have completed the prior steps, your ZTE Blade A310 should be dry. So now you can try to turn on the ZTE Blade A310. If perhaps this doesn’t function, we suggest you to hold out a few days or to bring the ZTE Blade A310 to a repairman.
What should not be done if the ZTE Blade A310 has fallen into the water
You will find a number of points not to accomplish when your ZTE Blade A310 has fallen into the water. The 1st is to try to turn the phone back on just after. This can demolish the ZTE Blade A310. Following, it is strongly recommended not to use a heat source to dry the ZTE Blade A310. Indeed, techniques such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the phone, do not shake it. In fact, it could as well damage the ZTE Blade A310.
